Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Display Value Default . Portamento Time Por 0~127 50 “Portamento” means that the pitch doesn’t change in clearly defined steps: it produces glides from one note to the next. Use this parameter to specify the speed at which those glides are carried out. The higher the value, the slower the transitions. NOTE If the receiving MIDI instrument doesn’t support this parameter, this setting will have no effect. Display Value Default . Octaver value oCv –4~–1 –1 This parameter allows you to specify the pitch of the note that is added while the “oCb” function is active. See “CONTROL 1 Assign” on p. 15 for details. Display Value Default “CUt” (Cutoff), “rES” (Resonance), “Pbd” (Pitch Bend Down), “PbU” (Pitch Bender Up), “Mod” (Modulation), “hLd” (Hold), “voL” (Volume), “PAn” (Panpot), “C16” (Control Change 16), “C17” (Control Change 17), “C18” (Control Change 18), “C19” (Control Change 19) “hLd” (Hold) . Pedal Assign Ped This parameter allows you to assign a function to the pedal you connect to the EXTERNAL PEDAL socket. . Auto Off 0ff, 10, 30, 240 240 Aof r This parameter allows you to specify how long the you can select a different velocity curve to suit your The PK-9’s pedals are velocity sensitive. If necessary, PK-9 should wait before switching itself off while playing style. you are not using it. If you don’t want the power to turn off automatically, select “Off”. 16 Restoring the settings to the factory condition (Factory Reset) MIDI Pedalboard PK-9 r Restoring the settings to the factory condition (Factory Reset) MIDI Pedalboard PK-9 r H . Factory Reset Refer to “Restoring the settings to the factory condition (Factory Reset)” on p. 17. . MIDI Dump Refer to “Archiving and restoring your settings (MIDI Dump)” on p. 17. . Save Refer to “Saving the settings (Save function)” on p. 14. FAC dmp SAv Restoring the settings to the factory condition (Factory Reset) The settings you’ve changed in Parameter mode (page 14) can be restored to their factory-set condition. This operation is called “Factory Reset.” 1. Simultaneously press the [CONTROL 1] and [CONTROL 2] pedals. The [CONTROL 1] and [CONTROL 2] indicators flash. 2. Press the [CONTROL 1] or [CONTROL 2] pedal to select the “FAC” parameter. 3. Press the Hold pedal to confirm. When the Factory Reset has been completed, the display will indicate “ok” and the PK-9 will leave Parameter mode. Archiving and restoring your settings (MIDI Dump) You can archive and restore your settings using a computer (with a MIDI interface, commercially available) or an external sequencer. Getting ready to archive/restore 1. Use a MIDI cable (commercially available) to connect the MIDI IN socket of external sequencer to the PK-9’s MIDI OUT socket. 2. Use another MIDI cable to connect the MIDI OUT socket of the external sequencer to the PK-9’s MIDI IN socket. Note: Your computer may have to be connected to a MIDI interface. The PK-9 needs to be connected to the MIDI interface. MIDI IN MIDI OUT MIDI OUT MIDI IN 3. Switch on the external sequencer and the PK-9. NOTE To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Archiving your settings to the external sequencer 1. Simultaneously press the [CONTROL 1] and [CONTROL 2] pedals. The [CONTROL 1] and [CONTROL 2] indicators flash. 2. Press the [CONTROL 1] or [CONTROL 2] pedal to select the “dMP” parameter. 3. Activate data reception or recording on the external device. 4. Wait until the sequencer’s count-in (if applicable) is finished and press Hold pedal to start the MIDI Dump. When the MIDI Dump has been completed, the display will indicate “ok” and the PK-9 will leave Parameter mode. 17 Parameter mode MIDI Pedalboard PK-9 Parameter mode MIDI Pedalboard PK-9 Stop recording on the external sequencer and save the data. Transmitting your settings back to the PK-9 1. Start the playback of the data you saved (and loaded). All of the PK-9’s indicators light and the display shows “dMP” (Dump). When the data dump has been received, the display briefly indicates “ok”. r 18 Appendix MIDI Pedalboard PK-9 r 5. Appendix Appendix MIDI Pedalboard PK-9 r 5. Appendix H Troubleshooting If the PK-9 does not function as you expect, please check the following points first. If this does not resolve the problem, contact your dealer or a nearby Roland service center. ¦ The PK-9 suddenly went off When 240 minutes have elapsed since you last played or operated this unit, the power will turn off automatically. (This is the factory setting). If you don’t need the power to turn off automatically, turn the “Auto Off” setting “Off.” Refer to page 16. ¦ No power If the PK-9 is supposed to be powered using the adaptor Did you press the PK-9’s [POWER] switch (rear panel)? > Press the PK-9’s [POWER] switch. Did you connect the supplied AC adapter? > Connect the adapter. If the PK-9 is supposed to be powered via its PK OUT socket Did you connect the supplied PK cabl...