Votes - 6, Average rating: 3.5
(
)
)
|
manual abstract
The DM-800 will keep the last Take/Phrase and punch in again. The exciting part about loop recording is: each recording can be saved as a different take on the disk! This way you can record a part again and again, then listen back to all the recordings to find the best one. You can choose whether to keep each take as you record it. Of course you will hear the latest Take/Phrase you recorded. This controls the input-output switching during Record Waiting modes. When a track is placed in Record Ready—and the Track Status Select Red LED is flashing—the input source will be monitored. Use this mode if you want to play along until a punch in. The track will playback from disk at all times except when actually recording and the Track Status Select red LED is lit. Use this mode if you want to hear other recordings on the track, for example, to manually punch in at a specific point. You can punch in and out using a MIDI pedal set to Continuous Controller #4. The Pedal operates like the REC key - pedal down = Record on, pedal down again = Record off. The MIDI channel used is the MIDI Control Channel, set in the System Parameter I page - press SYSTEM, PA6E(F5). Punch T i ne.