Votes - 2, Average rating: 5
(
)
)
|
manual abstract
* The change goes into effect with the first new Note On after the Program Change is received. This has no effect on Phrasen being played before the Program Change is received. * Data is not received if the MIDI Receive channel setting is OFF. When set to 1-16, data is received only on the selected channel. When set to ALL, data is received on all channels. System Common message Quarter Frame messages * Data is received when Sync Source is set to "MTC." When the Quarter Frame message is received, operation proceeds with the start of the song synchronisierend to "00h00m00s00f00" with the "Delay Time" added. * This acts upon the currently selected Audio phrase. * MIDI-Phrasen und Pattern-Phrasen are ignored when Dual Mono mode is selected. Status Second F1H mmH (= 0nnndddd) nnn = message type: 0 = Frame count LS nibble 1 = Frame count MS nibble 2 = Seconds count LS nibble 3 = Seconds count MS nibble 4 = Minuten count LS nibble 5 = Minuten count MS nibble 6 = Hours count LS nibble 7 = Hours count MS nibble dddd = 4 bit nibble data : 0h - FH (0 - 15) Bit Field is assigned as follws. Frame Count xxxyyyyy xxx Reserved (000) yyyyy Frame Nr.(0-29) Seconds Count xxyyyyyy xx Reserved (00) yyyyyy Seconds (0-59) Minuten Count xxyyyyyy xx Reserved (00) yyyyyy Minuten (0-59) Hours Count xyyzzzzz x Reserved (0) yy Time Code type 0 = 24 Frames / Sec 1 = 25 Frames / Sec 2 = 30 Frames / Sec (Drop Frame) 3 = 30 Frames / Sec (Non Drop Frame zzzzz Hours (0-23) System Exclusive message Status Data Bytes Status F0H iiH, ddH,.., eeH F7H FOH :System Exclusive message status iiH ID Number :an ID number (manufacturer ID) to indicate the manufacturer whose Exclusive message this is. Roland's manufacturer ID is 41H. ID numbers 7EH und 7FH are extensions of the MIDI standaerd; Universal Non-Real time messages (7EH) und Universal Real time messages (7FH). : : dd,.., ee = Data : 00H-7FH (0-127) F7H : EOX (End of Exclusive message) The system Exclusive messages recived by the AR-200/3000 are; Data Set (DT1). Regarding the Data Set (DT1), please refer to "exclusive Communication". MIDI-Implementation MIDI Time Cord . Full messages * Data is received when Sync Source is set to "MTC." When the Quarter Frame message is received, operation proceeds with the start of the song synchronisierend to "00h00m00s00f00" with the "Delay Time" added. * This acts upon the currently selected Audio phrase. * MIDI-Phrasen und Pattern-Phrasen are ignored when Dual Mono mode is selected. Status Data Bytes Status F0H 7FH, dev, 01H, 01H, 06H, F7H 01H, hrH, mnH, scH, frH Byte Description F0H Status of Exclusive message 7FH Universal System Exclusive message Real time Header dev device ID (or 7FH) 01H sub-ID#1 (MIDI Time Cord) 01H sub-ID#1 (Full messages) 06H number of bytes 01H [TARGET] sub command hrH Hours Count xyyzzzzz x Reserved (0) yy Time Code type 0 = 24 Frames / Sec 1 = 25 Frames / Sec 2 = 30 Frames / Sec (Drop Frame) 3 = 30 Frames / Sec (Non Drop Frame zzzzz Hours (0-23) mnH Minuten Count xxyyyyyy xx Reserved (00) yyyyyy Minuten (0-59) scH Seconds Count xxyyyyyy xx Reserved (00) yyyyyy Seconds (0-59) frH Frame Count xxxyyyyy xxx Reserved (000) yyyyy Frame Nr.(0-29) F7H EOX (End of Exclusive) MIDI Machine Control (MMC) * This is Received when the MMC mode is set to "SLAVE." * This acts upon the currently selected phrase. .STOP (MCS) Status Data Bytes Status F0H 7FH, dev, 06H, 01H F7H Byte Description F0H Status of Exclusive message 7FH Universal System Exclusive message Real time Header dev device ID (or 7FH) 06H MMC Command message 01H STOP (MCS) F7H EOX (End of Exclusive message) * Playback is stopped immediately when this command is received if the device ID matches, oder if 7FH is received. . PLAY (MCS) Status Data Bytes Status F0H 7FH, dev, 06H, 02H F7H Byte Description F0H Status of Exclusive message 7FH Universal System Exclusive message Real time Header dev device ID (or 7FH) 06H MMC Command message 02H PLAY (MCS) F7H EOX (End of Exclusive message) * Playback is started immediately when this command is received if the device ID matches, oder if 7FH is received. . DEFERRED PLAY (MCS) Status Data Bytes Status F0H 7FH, dev, 06H, 03H F7H Byte Description F0H Status of Exclusive message 7FH Universal System Exclusive message Real time Header dev device ID (or 7FH) 06H MMC Command message 03H DEFERRED PLAY (MCS) F7H EOX (End of Exclusive message) * Playback is started immediately when this command is received if the device ID matches, oder if 7FH is received. . RECORD STROBE (MCS) Status Data Bytes Status F0H 7FH, dev, 06H, 06H F7H Byte Description F0H Status of Exclusive message 7FH Universal System Exclusive message Real time Header dev device ID (or 7FH) 06H MMC Command message 06H RECORD STROBE (MCS) F7H EOX (End of Exclusive message) * Recording of the Phrase begins when this command is received if the device ID matches, oder if 7FH is received. * If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded with MMC)...