Votes - 2, Average rating: 3.5 ( )

Manafacture: PYLE Audio File size: 1.63 mb File name: Language of manual:

All other servicing should be referred to qualified personnel. 19. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 20. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Safety Check — Upon completion of any sen/ice or repairs to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition. WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. This symbol is intended to alert you to the - 6 presence of un-A insulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product's case. MW CAUTION HVAÉ #A RISK OF ELECTRIC SHOCK Mm MDO NOT OPEN A This symbol is intended to inform you that important operating and maintenance instructions are induded in the literature accompanying this product. CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified personnel. 1 - Pyle Pro Mixer PYD1000/1200 Owner’s Manual Your PYLE PRO Series Performance Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls, permit you to adjust sound levels accurately to achieve just the right mix for playing through your speakers system or for recording. Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect years of trouble-free service from this product. Input/Output Features PYD1000 Power Supply Plug the included power cord into the mixer first while the power is switched off, then plug the AC power cord into a proper power outlet. Voltage Switch- This mixer has selectable input voltage from 110V/60Hz (the standard in USA and CANADA) to 220W50Hz (for EUROPEAN operation). Please make sure the switch is in the proper postion before operating, otherwise severe damage will result not cover by the warranty. Please also replace the fuse with proper rating in this situation (see the fuse rating of F 500mA 250V printed at power inlet). Output Jack To connect mixer to a receiver or amplifier-use the cable with RCA plugs. Dual Purpose Stereo Inputs For using a turntable with a magnetic cartridge OR a high level input source. Ground Screw To connect ground wire from turntable, to eliminate the system hum. Input Select Switches Set these switches based on what is plugged into phono1/line1 and phono2/line3 input jacks. Stereo Line Inputs Let you connect most high-level audio sources, such as CD players, tape deck, tuner or VCR. Record Output Jacks To connect the mixer to a tape deck for recording the mixed program. PYD1200 Power Supply Plug the included power cord into the mixer first while the power is switched off, then plug the AC power cord into a proper power outlet. Voltage Switch This mixer has selectable input voltage from 110V/60Hz (the standard in USA and CANADA) to 220V/50Hz (for EUROPEAN operation). Please make sure the switch is in the proper postion before operating, otherwise severe damage will result not cover by the warranty. Please also replace the fuse with proper rating in this situation (see the fuse rating of F 500mA 250V printed at power inlet). Stereo Line Inputs Let you connect most high-level audio sources, such as CD players, tape deck, tuner or VCR. Output Jack - To connect mixer to a receiver or amplifier-choose to use cables with either XLR-type or RCA plugs. Booth Output Jacks - To connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location. Record Output Jacks To connect the mixer to a tape deck for recording the mixed program. Dual Purpose Stereo Inputs For using a turntable with a magnetic cartridge OR a high level input source. Ground Screw To connect ground wire from turntable, to eliminate the system hum. MIC2 Microphone connector Permits you to connect a balanced or unbalanced low impedance microphone with 1/4” plug. Input Select Switches Set these switches based on what is plugged into phono1/line1, phono2/line3, and phono3/line5 input jacks. Pyle Pro Mixer PYD1000/1200 - 2 Owner’s Manual - Pyle Pro Mixer PYD1000/1200 Owner’s Manual CO PYD1000 Channel Input Selector Lets you choose the input source to play for each channel. MIC Input Jack - For connecting a l...

Download now

Please, enter two numbers from picture: