|
manual abstract
Two different versions are available and operate on different ranges of UHF frequencies between either 682.35 MHz to 697.1 MHz (US version) and 854.1 MHz to 864.7 MHz (EURO version). THE MODELS AVAILABLE ARE: UHF-116M - Which comes equipped with a hand held microphone transmitter. UHF-116HL - Which comes equipped with a belt pack transmitter and Headset/ lavalier combo. UHF-116 SINGLE CHANNEL RECEIVER OPERATION: 1. Remove all packing materials. Save the box and packing materials to transport the unit and in case the unit ever requires service. 2. Plug the AC/DC adaptor into the rear of the receiver (6). Then plug the adaptor into an appropriate AC Outlet. Push the Power On (2) button to turn the unit on. The power indicator will be illuminated. 3. Extend the antenna fully vertical and point it out into the direction you will be speaking from. Frequencies UHF-116 SINGLE CHANNEL WIRELESS SYSTEM Features 10 11 System Control Control de sistema • Utilisation • Systemeinstellungen System Control Control de sistema • Utilisation • Systemeinstellungen 4. Insert the 1/4” cable into the jack labeled AF OUT (5) on the rear of the receiver and connect the other end of the cable to your amp, effects or mixer jack. 5. Set the channel selector pins (7) on both the transmitter and receiver to the desired frequency as indicated on the included Frequency Chart. 6. Adjust the volume using the level control (4) on the front panel. Note: Effective range between the transmitter and receiver is up to 250 feet. The UHF-216 dual channel UHF series wireless system is two separate single channel transmitters of different frequencies transmitting to one unit that houses both frequency receivers. There is also individual level control for each channel. Two different versions are available and operate on different ranges of UHF frequencies between either 682.35 MHz to 697.1 MHz (US version) and 854.1 MHz to 864.7 MHz (EUROPE version). THE MODELS AVAILABLE ARE: UHF-216M - Which comes equipped with (2) hand held microphone transmitters. UHF-216HL -Which comes equipped with (2) belt pack transmitters and (2) Headset/ lavalier combos. UHF-216 DUAL CHANNEL RECEIVER OPERATION: 1. Remove all packing materials. Save the box and packing materials to transport the unit and in case the unit ever requires service. 2. Plug the AC/DC adaptor into the rear of the receiver (6) and an appropriate AC Outlet. Push the Power On (2) button to turn the unit on. The power indicator will be illuminated. 3. Extend the two antennas fully vertical and point them towards the direction the performer(s) will be speaking from. 4. Insert the 1/4” cable into the jack labeled AUDIO OUT (5) on the rear of the receiver and connect the other end of the cable to your amp, effects or mixer jack. 5. Set the channel selector pins (7) on both the transmitter and receiver to the desired frequency as indicated on the included Frequency Chart. 6. Adjust the volume using the level control on the front panel. Note: Effec...
Other models in this manual:Musical Instruments - UHF-116M (4.67 mb)
Musical Instruments - UHF-116HL (4.67 mb)
Musical Instruments - UHF-216HL (4.67 mb)
Musical Instruments - UHF-216M (4.67 mb)