Votes - 3, Average rating: 3.7 ( )

Manafacture: Pioneer File size: 684.45 kb File name: 98afc663-177d-421f-9fc1-d4188c9bb780.pdf Language of manual:

This is also the simultaneous fixed recording output for recording. This output level is fixed. NOTE: Your mixer can simultaneously record through the USB Output while it is playing audio sources. For more information refer to the “Using your USB Mixer with a Computer” manual included. 13. Power Switch: Use this switch to turn on the mixer after all input devices are already connected to prevent damage to your equipment. Turn the mixer on before you turn on amplifiers and turn off amplifiers before you turn off the mixer. 14. AC In: This mixer is designed to work with the power supply assembly that comes with the unit. While the power is switched off, plug the power supply into the mixer first, then plug it into the outlet. 15. Master Output (RCA): This output is for connecting an external amplifier such as a PA system, powered monitors or a home stereo. The level of this output is controlled by the master knob. 16. Line Inputs: CD players, tape players, portable MP3 players or other line- level devices should be connected to these inputs. 17. Phono Inputs: This input is used for connecting your turntables. Only turntables with phono level output should be attached (most turntables have phono outputs) . 18. PHONO/LINE Switch: This switch is used to select between the Line inputs and Phono inputs on each channel. 19. GND: This screw connector should be used to secure the ground lead from a turntable. Note: It is recommended that the mixer be turned off before connecting and disconnecting any sources to the inputs of the mixer. Please see the separate manual for using the USB features of your mixer. GUIA DE INSTALACION RAPIDA DEL MEZCLADOR (ESPANOL) 1. Asegurese que todos los articulos incluidos al inicio de este manual esten incluidos en la caja. 2. LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO. 3. Estudie este diagrama de instalacion. 4. Coloque el mezclador en una posicion adecuada para su funcionamiento. 5. Asegurese que todos los dispositivos esten apagados y que todos los faders esten en la posicion «cero». 6. Conecte todas las fuentes de entrada estereo como se indica en el diagrama. 7. Conecte las salidas estereo a los amplificadores de alimentacion, unidades de cinta magnetica, y/o fuentes de audio. 8. Enchufe su mezclador y otros dispositivos a la alimentacion de corriente alterna. 9. Encienda todo en el siguiente orden: • fuentes de entrada de audio (por ejemplo, giradiscos o reproductores de CD) • su mezclador • por ultimo, cualquier amplificador 10. Al apagar, realice siempre esta operacion en sentido inverso: • apague los amplificadores • su mezclador • por ultimo, cualquier dispositivo de 11. Visite http: //ion-audio.com para registrar el producto. CARACTERISTICAS DEL PANEL FRONTAL 1. Crossfader reemplazable: Este fader deslizante mezcla el audio entre los canales 1 y 2. Nota: El usuario puede reemplazar este fader en caso de que se desgaste. Simplemente, retire la placa frontal y luego retire los to...

Download now

Please, enter two numbers from picture: