Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
No user serviceable parts inside. Refer Servicing to qualified service personnel. WARNING: TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. BEFORE USING THIS APPLIANCE, READ THE OPERATING GUIDE FOR FURTHER WARNINGS. CD MIX™ 7032 Please read this entire manual before hooking this mixer into your audio system. CAUTION: Do not use spray cleaner for any slide control as this will wash out vital lubricants and shorten component life. Parts Inventory Thank you for purchasing the Peavey CD MIX 7032 professional DJ mixing unit. When used in accordance with this manual, your new DJ mixer will give years of good service. In order to read this manual you will have already unpacked the unit. You should have: One mixer unit. One 16VAC UL listed wall-mount power supply unit. Please retain the packing material for future use. Features: • Rapid, positive CD/phono toggle switches on three music inputs • Channel-assignable Crossfade facility • Three Phono/CD and three Line level inputs; a total of six music inputs • 3-band graphic EQ ±12 dB on each band; 30 mm slide pots fitted with center-detent for easy zeroing of EQ • Front-panel-mounted Low-Z Mic input • Selectable headphone cueing for each music channel • Manual push-to-talk voice-over button • Cueing selector to listen to stereo program output, stereo channel cueing, or mono channel cue in right earcup and program output in left earcup • Built-in gooseneck XLR light socket • 45 mm heavy-duty crossfade slider • Mic bass cut switch • Power on/off switch with LED indicator • 45 mm headphone volume slider • High slew-rate super low-noise op amps used throughout the entire mixer circuitry • 60 mm high-quality Alps slide faders on all channels and master level control • Available in 115V 60 Hz and 220-240V 50 Hz versions • Extra program output provided for monitoring or lighting equipment General Description: The CD MIX™ 7032 multi-media entertainment mixer is a brand new addition to Peavey’s line of premium quality DJ equipment. It is an all-American-made, high-quality, rugged, professional DJ mixer. DJs, rap recording artists, and specialist DJ equipment dealers were closely involved in active consultancy during and throughout each design stage. Housed in a 5-1/4" x 19" super slim-line (only 1-3/4" deep) rugged steel chassis, the CD MIX 7032 boasts a truly remarkable array of much-preferred DJ features like: three individual music channels; six music inputs, three of these inputs being individually switchable to phono or CD; fully assignable crossfade; three-band audio EQ; and built-in gooseneck XLR light socket. All slider potentiometers and switches are studio-quality Alps components. The low-impedance, phantom-powered, front-panel-mounted microphone input delivers fast, positive connect and disconnect facility for the DJ’s mic. Many other DJ mixers have the mic socket mounted on the rear of the mixer chassis so the mixer has to be physically lifted out of the console to work with the mic connection. Because CDs are playing a much larger part as the preferred DJ music medium and vinyl is becoming very difficult to obtain, each phono input on this DJ mixer has an individual slide switch that changes the input from vinyl to CD (or back again) quickly and easily. So, as vinyl becomes even more scarce, every Phono (record deck) input may also be used for CD players. This method of vinyl/CD selection is unique to the Peavey line of DJ mixers. FRONT PANEL OUTPUT PEAK LEVEL 0 dB +12 left SBE5Ö 1 fi RIGHT 0£3lS3lË3i 10 EQUALIZER —2 17 LO MIO HI 18 ON POWER CD MIX™ 7032 ••••••••••••••••••••• Professional DJ Mixer PGM 13 PGM/CUE y 14 HEADPHONE LEVEL 01 23456789 10 nl I N I I I I I 15 n m Mic Channel: (1) Balanced Low Z Microphone Input - For use with low impedance microphones or low level sources equipped with an XLR connector. (2) Lo-Cut Switch: Removes low frequencies from the microphone response when in the ON positon, thus making speech more easily understood when the Equalizer is set for high-bass-boost. (3) Voice-Over Button: When pressed, this drops the music level to enable the DJ to make himself heard. (4) DJ Mic On/Off Switch: The DJ mic is "live" when the switch is in the ON position. (5) Microphone Level Slider: A mono slider that determines the output level of the microphone channel. Music Channels: Note: Channels 1, 2, and 3 functions are identical. (6) Phono/CD Or Line Selector Switch: Allows selection of phono/CD (L and R) or line (L and R) inputs. The “Line” position of this switch selects the line input, and the “CD-Phono” position selects the CD/phono input. (7) Channel Level Slider: A stereo slider that determines the output level of the channel. (8) Crossfade Assign Switches: The left-hand switch assigns channel 1, 2, or 3 to the left-hand side of the crossfader. The right-hand switch assigns channel 1, 2, or 3 to the right-hand side of the crossfade...