Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Mix the next big music hits. Lay down the loops from a library of different music styles. Add your voice and even sample parts of your favorite songs from your MP3 player. Make it Great with UCreate! IMPORTANT: PRESS RESET To exit DEMO MODE. 7 BPM -/+ Buttons 4 FX & Filter Knob 8 Distortion 15 Play Song 14 Record Song Rocker Button Button 1 2 3 5 6 9 10 11 12 13 On/Off & Volume Control Record Button Record Input Select Switch Hold Button Reset Loops Link Recording A&B Recording Play Recording Loop Controls 1. On/Off & Volume Control: Turns mixer on or off and adjusts the master volume. 2. Record Button: Press the Record button to start/ stop recording and save to the mixer. 3. Record Input Select Switch: Selects MP3 or Microphone to record from. DJ HINT: Ensure the switch is in the correct position before recording otherwise you may record from the wrong source. You can only record one at a time. 4. FX & Filter Knob: Select from 8 different effects (FX) and filters to distort and manipulate your music. 5. Hold Button: To maintain the effect of the Distortion Rocker. 6. Reset: Resets the memory. 7. BPM -/+ Buttons: Press – to decrease the tempo or + to increase the speed of the music. Tap the to quickly set the speed. DJ HINT: Tap with the beat of a song from your MP3 player to sync the speeds. Press and hold to return to default BPM. 8. Distortion Rocker: Press and move to manipulate the FX and/or filter to distort any “Linked” loops. DJ HINT: Use the “HOLD” button to keep the distortion on even if you stop pressing the Rocker. 9. Loops: Play and mute the different loops: Back Beats, Riffs, Licks, & Runs. 10. Link: Link Loops and recordings to the Distortion Rocker. 11. Recording A & B: Switch between recording A & B. DJ HINT: When the light is OFF recording A will play. If the light is ON recording B will play. You can switch between A & B anytime. 12. Recording Play: Plays recording one time. DJ HINT: Press repeatedly to start recording again. 13. Recording Loop: Plays & mutes recording as a Loop. 14. Record Song Button: Press to record your composition up to 2.5min. DJ NOTE: You can only record content currently stored in the mixer. 15. Play Song Button: Press to play back your recorded song. Features: - 8 FX /Filters - Internal microphone - 3 Back beats (5 sec. each) - Internal speaker - 3 Riffs (5 sec. each) - USB mini jack - 3 Licks (5 sec. each) - Stereo out (connect speakers/headphones sold separately) - 3 Runs (5 sec. each) - Line In (connect MP3 player sold separately) - 2 voice files (5 sec. each) - Microphone In (connect external microphone sold separately) - Touch panel interface - USB Cable Building a Song Using the touch panel you can add, replace, or remove loops and recordings to compose a song. The elements include: -Back beats (The foundation or “rhythm” of a song.) -Riffs (A short, repeated, musical phrase, which focuses much of the energy and excitement of a song) -Licks (A series of notes that is used in solos and melodic lines.) -Runs (fills up the empty spaces of a song to keep the music going.) For each element of the song, there are three different Loop options. Press the touchpoints under each to play, switch or mute one of the options. Add Voice, SFX, or Music Add your voice, sound effects, or music from your MP3 Player to your song. -Select Recording slot A or B by pressing A B on touch panel. DJ HINT: When the light is OFF recording A will be replaced. If the light is ON recording B will be replaced. Internal Microphone: To add your voice using the built in microphone: -Move the Record Switch to the microphone icon -Press the Record button to start recording. -Speak , play SFX or just make noise into the microphone (up to 5 sec). -Press the Record button to stop the recording. DJ HINT: The loops will stop playing from the mixer to ensure a clear recording. External Microphone: (microphone sold separately) You can also use an external microphone with UCreate Music. -Plug in your microphone into the Microphone In. DJ HINT: Use a mic that has an ON/OFF switch and be careful not the get the microphone too close to the speaker because you will get “Feedback” and a loud noise will come from the speaker. This could damage the speaker if it gets too loud. -Move the Record Switch to the microphone icon -Press the Record button to start recording -Speak, play SFX or just make noise into the microphone (up to 5 sec). -Press the Record button to stop the recording. DJ HINT: The loops will stop playing from the mixer to ensure a clear recording. MP3 Music: (MP3 player sold separately) You can also use your MP3 player to record music into UCreate Music. -Plug in your MP3 Player into the correct MP3 Input jack (cord sold separately) -Move the Record Switch to MP3 player icon -Press the Record button to start the recording. - Record up to a 5 second clip. -Press the Record button to stop the recording. DJ HINT: The loops will stop playing from the mixer to ensure a clear recording. * IMPORTANT...