NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.” Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” wlthm the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to A persons. A A The exclamation point within an equilateral triangle IS intended to alert the user to the presence of Im

The unit returns to the beginning of the current track only. . When you select a track with the numbered buttons on the remote control during the random play mode, the selected track starts to play and the random play mode is canceled. REPEAT PLAY A single track or all tracks can be played back repeatedly, Press the REPEAT button on the remote control repeatedly. “~1” lights up when the single track repeat play is selected, and “~” lights up when the all tracks repeat play is selected, To cancel

Please refer to them when you contact your Aiwa dealer in case of difficulty. Model No. Serial No. (Lot No.) CX-NA31 SX-FNA51 (NSX-A31 only) SX-NA34 (NSX-A34 only) SX-R21 O (NSX-A34 only) 120 V AC. Check that the rated voltage matches your local voltage. IMPORTANT Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end. To position the antennas FM feeder antenna: Extend this antenna horizontally in a T-shape and fix its ends to the wall. AM loop ante

When pressing CD n on the remote control, recording and CD play stop simultaneously. When pressing DISP in stop mode, the remaining recordable time is displayed for 4 seconds. To record on a previously recorded MD If there is an unrecorded section left on the MD, the new recording automatically starts from where the previous recording finished. If you want to start recording from the beginning of a previous recorded MD, erase the previous recording completely. (See page 21.) T. OVER is displayed

When the power is turned sound. on, the DEMO display is overridden by the operation display. Press the T-BASS button., When the power is turned off, the DEMO mode is restored. Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. To cancel DEMO mode Press the II SET button while the power is off. The clock &+l++2~+3~oFF (cancel)~ flashes on the display. (To set the current time, see “SETTING I THE CLOCK on page 15.) To re-activat

The timer recording period and tape length When the length of the tape to be recorded is shorter than the timer recording period, l on Deck 1 is released before the timer is off. When the tape length is longer than the timer recording period, l is not released. If l is not released for a long time, the tape in the deck may be damaged. Press W4 to release l. To check the timer setting Press TIMER while pressing SHIFT. The selected source, the timer-on time, and the duration for the timer-activate

8 BASIC OPERATIONS SELECTION OF AUDIO/VIDEO SOURCE ......................... 9 RECORDING AN AUDIO SOURCE ................................. 10 RADIO RECEPTION MANUAL TUNING ............................................................. 11 DIRECT TUNING ............................................................... 11 PRESETTING STATIONS ................................................. 12 DOLBY SURROUND SELECTING DOLBY PRO LOGIC ................................... 13 ADJUSTING SPEAKER LEVEL BALAN

@ Front speakers @ Center speaker Position inthecenter of thetwo front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit. @ Surround speakers Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3,2 feet) above ear height. @ Sub woofer Place the sub woofer in any place between the two front speakers. m Sound from the surround speakers or center speaker depends on the setting of

The indicator on the top of the remote control blinks twice while pressing the button. 3 Press the DIGIT buttons in the order of “4,” “O” and “6.” BEFORE OPERATION TAPE MONITOR POWER [ FUNCTION buttons VOLUME PHONES FRONi SPEAKERS A, B To turn the unit on 1 Turn the VOLUME control toward MIN. Otherwise, the speakers may be damaged. 2 Press one of the FUNCTION buttons (TUNER, PHONO, AUX/TV, CD, VIDEO 1, VIDEO 2 or VIDEO 3) or the TAPE MONITOR button. When pressing the TUNER button, the previously

Select a track with 144 or a>1. C : All tracks are played repeatedly. * or REPEAT on the remote control (except CSD-ED37) To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the CD indicator flashes in step 2, play starts without pressing -11. REPEAT -PLAY H+, m n STOP To select a track directly with the remote control (except CSD-ED37), press the numbered buttons O-9 and +1 O. CD play starts fr