Votes - 4, Average rating: 4.3
(
)
)
|
Photos and specs Sony MHC-BX9 |
Other manuals for this model:
manual abstract
Clear the entire xonce in stop mode or program twice while playing. Tips • The program you made remains in the CD player even after it has been played back. Press nNto play the same program again. • If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20. – the total playing time has exceeded 100 minutes. 22 The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. ?/1 (Power) 24 DOLBY NR x 3,5 1 1 Insert a recordable tape into deck B. 2 Press one of the function buttons you want to record from (e.g., CD). When you want to record from TAPE A, press TAPE A/B repeatedly until TAPE A is selected. 3 Press REC PAUSE/START. Deck B stands by for recording. The REC PAUSE/START button flashes. 4 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. 6 Press nNto start playing the source to be recorded. To Press Stop recording x. Pause recording REC PAUSE/START. Tips • If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press nNto start playback of the reverse side, then press xwhere you want to start recording. TAPE B reverse side indicator lights up (see page 16). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing REC PAUSE/START in step 3 (MHC-BX9/DX9 only). • When recording from a CD, you can press .or >to select tracks during recording pause mode (after pressing REC PAUSE/START in step 3 and before pressing REC PAUSE/START in step 5). Recording a CD by specifying track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. DOLBY NR 3 x18 6 11 5 24 EDIT 510 12 1?/1(Power) jJlLhHSsHSs CHECK 1 Place a CD and insert a recordable tape into deck B 2 Press CD. 3 Press PLAY MODE repeatedly until “PROGRAM” scrolls and “PGM” appears in the display. 4 Press one of the DISC 1~3 buttons to select a CD. To program all the tracks on a CD at once, proceed to step 6 while “AL” appears in the display. 5 Press .or >until the track you want appears in the display. Disc tray Total playing time number (including selected track) PGM Track number 6 Press ENTER. The track(s) is(are) programmed. The program step number appears, followed by the total playing time. 7 To program additional tracks to be recorded on side A, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. 8 Press Xto insert a pause at the end of side A. “P” appears in the display and the total playing time resets to “0.00” in the display. 9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. 10 Press CD SYNC HI-DUB. Deck B stands by for recording and the CD player stands by for playback. REC PAUSE/START button blinks. 11 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 12 Press REC PAUSE/START. Recording starts. To stop recording Press x. To check the order Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. To cancel Program Edit Press PLAY MODE repeatedly until “PGM” or “SHUFFLE” disappears from the display. Tip When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC HI DUB (MHC-BX9/DX9 only). Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Do the following steps before recording. 1 Place a CD. 2 Press CD. 3 Press EDIT once, so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Note You cannot use Tape Select Edit for discs containing over 20 tracks. DJ Effects DJ Effects Looping part of a CD — Loop With the loop function, you can repeat part of a CD during playback. This lets you create original recordings. jJlLhHSsHSsLOOP MENU +/– LOOP*b/B , Press and hold LOOP during playback at the point you want to start the Loop function, and release to resume normal play. To adjust the loop length Press MENU +/– while holding LOOP on the remote (or press b/Bwhile holding LOOP*) to select different LOOP lengths (LOOP 1~20). * For European and North American models only. Flashing part of a CD — Flash With the flash function, you can “flash” the CD sound during playback. This lets you create original recordings. jJlLhHSsHSs MENU +/– FLASH , Press and hold FLASH during playback at the point you want to start the Flash function, and release to resume normal...
Other models in this manual:Home Stereos - MHC-DX7 (475.06 kb)
Home Stereos - MHC-DX9 (475.06 kb)