Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
When the transmitter receives an audio signal again, the power automatically turns on. The effective areas of the transmitter Wireless system that allows you to use your system free from the restriction of speaker cords. The optimum signal reception range is up to approximately 30.5 m (100 feet) without the system picking up some interference. However, the distance may be reduced according to the surroundings and environment. If the system picks up some noise while using it within the above mentioned distance, reduce the distance between the transmitter unit and the main unit, or select another channel. Notes • When you use the main unit inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. • Even within the signal reception area, there are some spots (dead spot) where the RF signal cannot be received. This is a characteristic inherent to RF signals, and does not indicate a malfunction. By slightly moving the transmitter, the location of the dead spot can be changed. Notes on receiving performance This system component utilizes very high frequency signals in the 900 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the possible receiving range or cause interference with reception. – Radio waves generated such as cellphones and cordless phone systems or metal instruments are placed on the unit. – Inside a building with walls containing steel beams. – Area with many steel file cabinets, etc. – Area with many electrical appliances capable of generating electromagnetic noise. – Transmitter is placed on a metal instrument. – Area facing roadways. – Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. – Noise or interfering signals exist in the surroundings due to wireless communication systems installed along roadways. – Transmitter is placed directly on floor. Placing it up off the floor, such as on a desk, is recommended. Optional Components continued 31GB Listening to audio using wireless system 1 Start playing the connected component. 2 Press WIRELESS on the unit to switch the function to WIRELESS. When the sound is distorted 1 Move CHANNEL 1–3 on the transmitter to select a radio frequency. CHANNEL 1: 913.6 MHz CHANNEL 2: 914.0 MHz CHANNEL 3: 914.4 MHz 2 Press WIRELESS on the unit. “AUTO SCAN” appears. When FM broadcast or noise or no audio is heard, press WIRELESS on the unit several times. If you do not hear clear audio, select another channel using CHANNEL 1–3 on the transmitter, then press WIRELESS on the unit again. To finish using WIRELESS function Press any function button to select different function and quit WIRELESS. Notes • You may not hear the beginning of the sound from the main unit until the transmitter starts sending the RF signals after detecting an audio signal. • If the transmitter is connected to the headphones jack of the source component, set the volume of that component as high as possible without distorting the audio signal. • If you hold the antenna of the transmitter with your hand, noise may occur. However this is not a malfunction. • When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the wall outlet holding the plug. Do not pull on the cord. 32GB Troubleshooting Problems and remedies Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. When the ?/1 indicator flashes Immediately unplug the power cord and check the following items. • If your system has a voltage selector, is the voltage selector set to the correct voltage? Check the voltage for your region, then make sure the voltage selector is set correctly. • Are the + and – speaker cords shortcircuited? • Are you using only the prescribed speakers? • Is anything blocking the ventilation holes on the rear of the system? Check all the above items and fix any problems found. After ?/1 indicator stops flashing, reconnect the power cord and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General The display starts flashing as soon as you plug in the power cord even though you have not turned on the system (see step 5 of “Hooking up the system” (page 7)). • Press DISPLAY twice while the system is off. The demonstration disappears. “– –:– –” appears in the display. • A power interruption has occurred. Set the clock (page 10) and timer settings (pages 25 and 26) again. The clock setting/radio presetting/timer is canceled. • Redo the following: – “Setting the clock” (page 10) – “Presetting radi...
Other models in this manual:Home Stereos - MHC-GX250 (497.52 kb)
Home Stereos - MHC-GX450 (497.52 kb)
Home Stereos - MHC-GX750 (497.52 kb)
Home Stereos - MHC-RG555 (497.52 kb)