|
Other manuals for this model:
manual abstract
rewind Remove a tape Press PUSH Z on the unit. Tape – Play continued 17GB Searching for the beginning of the current or the next track (AMS)* To go forward Press > during playback when H lights. “TAPE A (or TAPE B) >>> +1” appears. Press . during playback when h lights. “TAPE A (or TAPE B) <<< +1” appears. To go back Press . during playback when H lights. “TAPE A (or TAPE B) <<< –1” appears. Press > during playback when h lights. “TAPE A (or TAPE B) >>> –1” appears. * AMS (Automatic Music Sensor) Note The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – When the system is placed near a television. Tip When a tape is inserted, corresponding forward/ reverse indicators light. Tape – Recording Recording your favorite CD tracks on a tape — CD-TAPE Synchro Recording You can record a whole CD on a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically. 1 Load a recordable tape into deck B, then press TAPE A/B to select deck B. 2 Press DIRECTION on the unit repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. When you want to record from the reverse side, press nN, then press x. The TAPE B reverse side indicator lights up. 3 Press CD and load a disc you want to record. 4 Press CD SYNC on the unit. Deck B stands by for recording. “REC” flashes. 5 Press REC PAUSE/START on the unit. Recording starts. To stop recording Press x. To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 3 and 4, perform steps 2 to 5 of “Creating your own program” (page 12). Tips • To check the required tape length for recording a disc, press EDIT on the unit until “EDIT” flashes after you have loaded disc and pressed CD. The required tape length for the currently selected disc appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). • You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 audio tracks. 18GB Recording on a tape manually — Manual Recording You can record just the portions you like from a CD, tape or radio program on a tape. You can also record from connected components (see “Hooking up optional components” on page 28). 1 Load a recordable tape into deck B, then press TAPE A/B to select deck B. 2 Press DIRECTION on the unit repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. When you want to record from the reverse side, press nN, then press x. The TAPE B reverse side indicator lights up. 3 Press CD, TAPE A/B, TUNER/BAND, GAME or MD (VIDEO) to select the desired source to record. • CD: To record from this system’s CD player. • Tape: To record from this system’s tape deck A. • Tuner: To record from this system’s tuner. • Game: To record from the connected video game machine to GAME INPUT AUDIO L/R jacks. • MD (VIDEO): To record from the connected MD or VCR to MD (VIDEO) IN jacks. 4 Press REC PAUSE/START on the unit. Deck B stands by for recording. “REC” flashes. 5 Press REC PAUSE/START on the unit, then start playing the desired source to record. Recording starts. To stop recording Press x. Note You cannot listen to other sources while recording. Tips • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • For recording from the tuner: If noise is heard while recording from the tuner, move the respective antenna to reduce the noise. Tape – Recording 19GB Sound Adjustment Selecting the sound system (MHC-RG660 only) You can enjoy different sounds by selecting the sound mode you want. Press SURR SS MODE on the unit to select the sound you want. LINK: Reproduces the same sound with the different output level. MATRIX SURR: Reproduces a wide range of sound that actually can sense the size of the room. Adjusting the sound You can reinforce the bass and create a more powerful sound. Press GROOVE on the unit. Each time you press the button, the display changes cyclically as follows: GROOVE ON* t V-GROOVE ON* t GROOVE OFF * The volume switches to power mode, the equalizer curve changes, and the “GROOVE” or “V-GROOVE” lights up. Selecting the sound effect Selecting the effect from the music menu Press PRESET EQ (or MUSIC EQ, MOVIE EQ or GAME EQ on the unit) repeatedly to select the preset you desire. The preset name appears in the display. See the chart “Sound effect options”. To cancel the sound effect Press EFFECT ON/OFF on the unit. Sound effect options “SURR” appears if you select an effect with surround effects. MUSIC EQ Effect ROCK POP JAZZ DANCE SOUL ORIENTAL Standard music sources MOVIE EQ Effect ACTION DRAMA MUSICAL Soundtracks and special listening situations GAME EQ Effect ADVENTURE ARCADE RACING PlayStation 1, 2 and other video game music sources 20GB Adjusting the graphic Selecting the surround equ...
Other models in this manual:Home Stereos - MHC-RG660 (421.54 kb)