|
Other manuals for this model:
manual abstract
If you select both sides recording or front side recording, press TAPE nN to light up the N indicator. If you record on the reverse side, press TAPE nN again to light up the n indicator. 6 Press TAPE X, then start playing the desired source to record. Recording starts. Other operations To Do this Stop recording Press TAPE x. Pause recording Press TAPE X on the unit. 12GB Sound Adjustment Adjusting the sound Timer Falling asleep to music You can adjust the bass and treble to enjoy more powerful sound. Generating a more dynamic sound (Dynamic Sound Generator) Press DSG on the unit. To cancel the DSG, press DSG again. Adjusting the bass and treble You can adjust the bass and treble. 1 Press EQ repeatedly to select “BASS” or “TRE”. Each time you press the button, the display changes as follows: BASS y TRE 2 Press EQ + or – repeatedly to adjust the level while “BASS” or “TRE” appears. To adjust the bass on the unit Turn BASS. To adjust the treble on the unit Turn TREBLE. To exit the bass and treble settings Press any button other than EQ or EQ +/–. Also, if you do not perform any operations for a few seconds, the display automatically returns to the original display. —Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t … t 10MIN t OFF * The system automatically turns off in 240 minutes or after the current CD or tape finishes playing. Other operations To Press Check the SLEEP once. remaining time** Change the time SLEEP repeatedly to select the to turn off time you want. Cancel the Sleep SLEEP repeatedly until “OFF” Timer Function appears. **You cannot check the remaining time if you select “AUTO”. Tip You can use the Sleep Timer, even if you have not set the clock. Tape – Recording/ Sound Adjustment/Timer 13GB Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5). 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 7). • TAPE: Load a tape (see “Playing a tape” on page 11). • TUNER: Tune in the preset radio station (see “Listening to the radio” on page 10). 2 Press VOL + or – to adjust the volume. 3 Press CLOCK/TIMER SET. 4 Press . or > repeatedly until “DAILY” appears, then press ENTER. “ON TIME” appears and the hour indication flashes. 5 Set the time to start playing. Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER. 6 Set the time to stop playing following the same procedure as step 5. 7 Press . or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time, the sound source and VOLUME appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. Change the setting Start over from step 1. Cancel both Daily 1 Press CLOCK/TIMER Timer and Timer SELECT. Recording 2 Press . or > repeatedly until “OFF” appears, then press ENTER. Notes • The Daily Timer setting or the Timer Recording setting overlaps with part or all of another timer setting. • If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated. • You cannot use the optional component connected to MD (VIDEO) IN jacks as the sound source for Daily Timer. • When the Daily Timer is set to “OFF”, “SELECT” does not appear. However, “SELECT” does appear when the Timer Recording is set to “ON”. Cancel the timer/ activate the timer/ check the settings Other operations To Do this 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until “SELECT” appears, then press ENTER. 3 Press . or > repeatedly until “DAILY”, “ON” or “OFF” appears, then press ENTER. 14GB Timer recording radio programs To timer record, you must first preset the radio station (see “Presetting radio stations” on page 8) and set the clock (see “Setting the clock” on page 5). 1 Tune in the preset radio station (see “Listening to a preset station” on page 10). 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly until “REC” appears, then press ENTER. “ON TIME” appears and the hour indication flashes. 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. Timer Recording settings and the desired stat...