Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
The CD player stands by for playback. 5 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 6 Press REC PAUSE. Recording starts. To stop recording Press x. Tips • If you want to record from the reverse side, press TAPE A/B repeatedly to select deck B after step 1. Press hH to start playback of the reverse side, then press x where you want to start recording. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • You can use synchro record only when recording a CD. Note You cannot listen to other sources while recording. Listening to the radio –– Preset Tuning Preset radio stations in the system’s memory first (see “Step 3: Presetting radio stations” on page 7). ?/1 STEREO/ +/– (Power) MONO VOLUME 12 . nN X x m M > TUNER/BAND TUNING +/– PRESET +/– VOL +/– 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Turn the shuttle until it clicks (or press PRESET +/– on the remote) to tune in the desired preset station. Turn counter- Turn clockwise clockwise (or press PRESET + (or press PRESET – on the remote) on the remote) for for higher lower preset preset numbers. numbers. Preset number* Frequency VOLUME MHz kHzALL DISCS § * When only one station is preset, “ONE PRESET” appears in the display. continued Basic Operations Listening to the radio (continued) To Do this Turn off the radio Press ?/1. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press + or – (or TUNING +/– on the remote) repeatedly. For automatic tuning, press and hold + or – (or TUNING +/– on the remote). Tips • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, adjust the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use a TYPE I (normal) tape. ?/1 (Power) +/– 53 x hH 12 46 1 Press A and insert a recordable tape into deck B. With the side you want to record facing forward 2 Press TUNER/BAND to select the band you want. 3 Turn the shuttle until it clicks to tune in a preset station. Turn counter- Turn clockwise clockwise for for higher lower preset preset numbers. numbers. Preset number Frequency VOLUME MHz kHzALL DISCS § 4 Press REC. Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side). 5 Press DIRECTION repeatedly to select G to record on one side. Select j (or RELAY) to record on both sides. 6 Press REC PAUSE. Recording starts. To stop recording Press x. Tips • If you want to record from the reverse side, press TAPE A/B repeatedly to select deck B after step 1. Press hH to start playback of the reverse side, then press x where you want to start recording. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use + and – in step 3 to tune in the desired station manually. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use a TYPE I (normal) tape. You can also use ./> to quickly search for songs you want to hear. To select either deck A or B, press TAPE A/B repeatedly. However, you can play the reverse side of deck B only. (For deck A, you can play the forward side only.) 4 Basic Operations x X VOLUME . > 12 3 2 ?/1 (Power) Shuttle . nN X x m M > nN x . > m M TAPE A/B VOL +/– continued Playing a tape (continued) 1 Press TAPE A/B. To select deck A or B, press TAPE A/B repeatedly. 2 Press A and insert a recorded tape in deck A or B. With the side you want to play facing forward 3 Press DIRECTION repeatedly to select g to play one side. Select j* to play both sides. To play both decks in succession, select RELAY (Relay Play)**. 4 Press hH. For deck B, press hH again to play the reverse side. The tape starts playing. * Deck B only. The deck stops automatically after repeating sequence five times. **In Relay Play, deck A plays the forward side only. After the playback of deck A, deck B repeats the sequence five times. To Do this Stop playback Press x. Pause Press X. Press again to resume playback. Fast-forward Turn the shuttle clockwise until it clicks while playing the front side or counterclockwise until it clicks while playing the reverse side (or press M or m on the remote). Rewind Turn the shuttle counterclockwise until it clicks while playing the front side or clockwise until...
Other models in this manual:Home Stereos - MHC-DX2 (507.01 kb)