Votes - 3, Average rating: 4
(
)
)
|
manual abstract
on the unit. .The AC power cord can be changed only by a qualified iPod nano repeatedly to select the CD function. “CD POWER OFF” appears. With CD player power service facility. iPod classic 5th generation iPod touch If the STANDBY indicator flashes Sleep Timer: turned off, disc access time is increased. To turn on 120 GB 2 Press PLAY MODE . repeatedly until “PGM” appears (video camera) 2nd generation/ On placement You can fall asleep to music. This function works even if Immediately unplug the power cord, and check the CD player power, repeat the procedure until “CD 160 GB (2009) while the player is stopped. iPod touch .Do not place the system in an inclined position or in following items. the clock is not set. POWER ON” appears. Late 2009 locations that are extremely hot, cold, dusty, dirty, or track or file number appears. system automatically turns off after the current disc stops 3 Press ./.. repeatedly until the desired Press SLEEP . repeatedly. If you select “AUTO,” the .If your system has a voltage selector, is the voltage humid or lacking adequate ventilation, or subject to selector set to the correct voltage? To reset the system to factory settings vibration, direct sunlight or a bright light. +/..repeatedly or in 100 minutes. When programming files, press .Are you using only the supplied speakers? If the system still does not operate properly, reset the .Be careful when placing the unit or speakers on to select the desired folder, and then select the desired .Is anything blocking the ventilation holes on the top system to factory settings. Play Timer: surfaces that have been specially treated (for example, file. or back of the system? Use buttons on the unit to reset the unit to its factory You can wake up to CD, tuner or iPod at a preset time. with wax, oil, polish) as staining or discoloration of the .Is the iPod connector . short-circuited? default settings. surface may result. Make sure you have set the clock. iPod nano After the STANDBY indicator . stops flashing, 1 Disconnect and reconnect the power cord, and then .If the system is brought directly from a cold to a warm iPod classic 4th generation iPod touch reconnect the power cord, and turn on the system. If 1 Prepare the sound source. turn on the system. location or is placed in a very damp room, moisture 160 GB (2007) (video) 1st generation the issue persists, contact your nearest Sony dealer. may condense on the lens inside the CD player, and Prepare the sound source, and then press VOLUME 2 Press ...., VOL + .and ..CANCEL . at the +/.. to adjust the volume. cause the system to malfunction. In this situation, Selected track or file Total playing time of program same time. number (including selected track To start from a specific track or file, create your own General remove the disc, and leave the system turned on for All user-configured settings, such as preset radio about an hour until the moisture evaporates. or file) program. Sound comes from one channel, or the left and stations, timer, and the clock, are deleted. 2 Press TIMER MENU .. right volumes are unbalanced. On heat buildup iPod nano 4 Press (or ENTER on the unit) . to add the track 3 Press ./.. repeatedly to select “PLAY SET?,” and .Place the speakers as symmetrically as possible. iPod .Heat buildup on the unit during operation is normal 3rd generation or file to the program. iPod nano .. .Connect only the supplied speakers. and is not cause for alarm. (video) iPod classic then press 2nd generation “.....” appears when the total program time There is no sound. .Do not touch the cabinet if it has been used 80 GB “ON” appears, and the hour indication flashes. (aluminum) exceeds 100 minutes for a CD, or when you select a Severe hum or noise. .Make sure the iPod is connected securely. continuously at a high volume because the cabinet may CD track whose number is 21 or over, or when you 4 Set the time to start playback. .Move the system away from sources of noise. .Make sure the iPod is playing music. have become hot. select an MP3 file. Press ./.. repeatedly to set the hour, and then .Connect the system to a different wall socket. .Adjust the volume. .Do not obstruct the ventilation holes. 5 Repeat steps 3 through 4 to program additional press .. .Install a noise filter (available separately) to the power On the speaker system tracks or files, up to a total of 25 tracks or files. The minute indication flashes. Use the procedure cord. The sound is distorted. This speaker system is not magnetically shielded, and .Make sure the iPod is connected securely. above to set the minutes. 6 To play your program of tracks or files, press .(or The remote does not function. the picture on nearby TV sets may become magnetically .Turn down the volume. iPod nano CD ..on the unit) .. 5 Use the same procedure as in step 4 to set the time .Remove any obstacles between the remote and the distorted. In this situation, turn off the TV, wait 15 to .Set the “EQ” setting of the iPod to “Off ” or “Flat....