Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
AM loop antenna FM75 AM 3 Set VOLTAGE SELECTOR to the position of your local power line voltage (except for North American, European, Mexican, South African, Thailand and Australian models). 220-240V VOLTAGE SELECTOR 110-120V 4 Connect the power cord to a wall outlet. The demonstration appears in the display. If the plug on this unit does not fit your wall outlet, detach the supplied adapter from the plug (except for North and South American countries, Europe and Australia). 5 Deactivate the demonstration mode by pressing DISPLAY/DEMO while the system is off. Inserting two size AA (R6) batteries into the remote Tips • With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. • When you set the time, the demonstration is deactivated. To activate the demonstration again, press DISPLAY/DEMO while the system is off. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Hold down PLAY MODE and press 1/uto turn off the system. Step 2: Setting the time You must set the time before using the timer functions. The clock is on a 24- hour system for the European and Brazilian models, and a 12-hour system for other models. The 24-hour system model is used for illustration purpose. 1 3,5 2,4 LBT-D390/D790/G5500/XB33/XB33K/ XB44/XB44K/XB50/XB60 only 1 Press t/CLOCK SET. The hour indication flashes. 4 Press TUNING +/– to set the minutes. 5 Press ENTER/NEXT. The clock starts. LBT-XB66/XB66K/XB660 only 1 Press t/CLOCK SET. The hour indication flashes. 2 Press TUNING +/– to set the hour. 2 Press TUNING +/– to set the hour. 3 Press ENTER/NEXT. The minutes indication flashes. 3 Press ENTER/NEXT. The minutes indication flashes. 4 Press TUNING +/– to set the minutes. 5 Press ENTER/NEXT. The clock starts. Tip If you make a mistake, start over from step 1. Step 3: Presetting radio stations You can preset the following number of stations: — 2 band model: 20 for FM and 10 for AM — 3 band model: 20 for FM, 10 for MW, and 10 for LW — 4 band model: 20 for FM, 10 for MW, 10 for LW, and 5 for UKV 3 Press TUNING +/–. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF TUNED STEREO AUTO ALL DISC S MHz LBT-XB66/XB66K/XB660 The bands you can select depend on the kind of tuner built into your system. Confirm the bands by pressing TUNER/BAND repeatedly. DISCALL DOLBY NR OFF AUTO TUNED STEREO MHzS 1/u 4 Press TUNER MEMORY. (Power) 6 4 23,51 A preset number flashes in the display. LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF TUNED STEREO AUTO ALL DISC S LBT-XB66/XB66K/XB660 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: DISCALL DOLBY NR OFF AUTO TUNED STEREO S 5 Press TUNING +/– to select the preset number you want. 2 band model: FM .AM LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 3 band model: DOLBY NR OFF FM nMW nLW TUNED STEREO AUTO n ALL DISC S 4 band model: FM nMW nLW nUKV* n * When you select this band, “STEREO Plus” appears in the display. LBT-XB66/XB66K/XB660 DISCALL DOLBY NR OFF AUTO TUNED STEREO S 2 Press TUNING MODE repeatedly until “AUTO” appears in the 6 Press ENTER/NEXT. The station is stored. display. 7 Repeat steps 1 through 6 to store other stations. continued Step 3: Presetting radio stations (continued) To tune in a station with a weak signal Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in the station. To change the preset number Start over from step 1. To change the AM tuning interval (Except for the European and the Middle Eastern models) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval to 10 kHz (or 9 kHz), press TUNER/BAND repeatedly until “AM” appears first, then turn off the system. While holding down ENTER/NEXT, turn the system back on. When you change the interval, the AM preset stations will be erased. To reset the interval, repeat the same procedure. Note The preset stations are canceled when you disconnect the power cord or if a power failure occurs for half a day. Connecting optional AV components To enhance your system, you can connect optional components. Refer to the instructions included with each component for details. Connecting audio components Connecting a turntable Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears. To the audio output of the turntable Note Using the turntable at high volume may cause distortion or howling. Th...
Other models in this manual:Home Stereos - LBT-D390 (854.96 kb)
Home Stereos - LBT-G5500 (854.96 kb)
Home Stereos - LBT-XB33 (854.96 kb)
Home Stereos - LBT-XB33K (854.96 kb)