Votes - 3, Average rating: 3.7 ( )

Manafacture: Sony File size: 942.19 kb File name: Language of manual:

Other manuals for this model:

Home Stereos - MHC-RX900 (942.15 kb)

Home Stereos - MHC-RX900 (924.91 kb)

If a disc is not placed properly it will not be recognized. With the label side up. When you play a single CD, place it on the inner circle of the tray. To insert a third disc, press DISC SKIP/ EX-CHANGE to rotate the disc tray. 2 Press one of the DISC 1~3 buttons. The disc tray closes and play starts. If you press CD (P(or CD (on the remote) when the disc tray is closed, play starts from the CD loaded on the tray whose button is lit green. Disc tray number Playing time MODE 0) DISC SKIP/ EX-CHANGE CD ( P p =+ 0) Track number VOL +/– VOLUME=+PLAY A . SHUFFLE REPEAT 1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § To Do this Stop play Press p. Pause Press CD (P(Pon the remote). Press again to resume play. Select a track During play or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go back) and release it when you reach the desired track. (Or press +(to go forward) or =(to go back) on the remote.) Find a point in Press and hold down )or a track 0during play and release it at the desired point. Select a CD Press a DISC 1~3 button or in stop mode DISC SKIP/EX-CHANGE. Play only the Press PLAY MODE CD you have repeatedly until “1 DISC” selected appears. Play all CDs Press PLAY MODE repeatedly until “ALL DISCS” appears. Remove the CD Press ¤. Exchange other Press DISC SKIP/ CDs while EX-CHANGE. playing Adjust the Turn VOLUME (or press VOL volume +/– on the remote). Tips • Pressing CD (Pwhen the power is off automatically turns the power on and starts CD playback if there is a CD in the tray (One Touch Play). • You can switch from another source to the CD player and start playing a CD just by pressing CD (Por the DISC 1~3 buttons (Automatic Source Selection). • If there is no CD in the player, “CD NO DISC” appears in the display. • When a disc tray holding a CD is selected (or playing), the DISC 1~3 button for that tray lights green. When a disc tray holding a CD is not selected, the DISC 1~3 button for that tray lights orange. When all disc trays are empty, the DISC 1~3 buttons all light green. Basic Operations Recording a CD — CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. DISC SKIP/ (Power) p 5 EX-CHANGE 2 DOLBY NR 4 13 1 Press ¤and insert a blank tape into deck B. With the side you want to record facing forward 2 Press ¤and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ((for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press PPAUSE. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC. Note You cannot listen to other sources while recording. Listening to the radio –– Preset Tuning Preset radio stations in the tuner's memory first (see “Step 3: Presetting radio stations”). (Power) 21 STEREO/MONO VOLUME 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press the button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nSW n or FM nMW nLW n 4 band model: FM nMW nLW nUKV* n * “STEREO PLUS” is displayed when you select UKV. 2 Turn the jog dial (or press =or +on the remote) to tune in the desired preset station. Basic Operations Turn counterclockwise + = for higher on the remote) for lower preset preset numbers. numbers. Preset number Frequency Turn clockwise (or press + A . (or press = on the remote) TUNER/BAND =+ VOLUME MHz kHzALL DISCS § To Do this Turn off the radio Press . Adjust the volume Turn VOLUME (or press VOL +/– VOL +/– on the remote). continued Listening to the radio (continued) To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press + or – repeatedly. For automatic tuning, press and hold + or –. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” app...

Download now

Please, enter two numbers from picture: