Votes - 2, Average rating: 3.5 ( )

Manafacture: Sony File size: 942.15 kb File name: Language of manual:

Other manuals for this model:

Home Stereos - MHC-RX55 (942.19 kb)

Home Stereos - MHC-RX55 (924.91 kb)

Home Stereos - MHC-RX55 (425.88 kb)

Home Stereos - MHC-RX55 (413.93 kb)

Add a track to the 1 Select the disc tray with a program DISC 1~3 button. 2 Select the track by turning the jog dial. 3 Press ENTER/NEXT. Clear the entire ponce in stop mode or program twice while playing. Tips • The program you made remains in the CD player even after it has been played back. Press CD (P to play the same program again. • If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20. – the total playing time has exceeded 100 minutes. Playing CDs without interruption –– Non-Stop Play You can play CDs without pausing between tracks. (Power) 12 3 1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD. 2 Press NON-STOP to light the indicator. “NON-STOP PLAY” appears in the display. 3 Press CD (P. To cancel Non-Stop Play Press NON-STOP so that the indicator goes out and “NON-STOP OFF” appears in the display. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. (Power) 2 3 p DOLBY NR 4 15 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Press rREC. Deck B stands by for recording. The indicator on TAPE B ((for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press PPAUSE. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording p. Pause recording PPAUSE. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing r REC. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing rREC. • When recording from a CD, you can use the jog dial to select tracks during rec pause mode (after pressing rREC in step 3 and before pressing P PAUSE in step 5). Recording a CD by specifying track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. (Power) 2 4 112 p 11,EDIT 3 56 110 8 A . CHECK 1 Place a CD and insert a blank tape into deck B. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1~3 buttons to select a CD. 5 Turn the jog dial until the desired track appears in the display. Total playing time Disc number (including selected track) SHUFFLE REPEAT 1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § Track number 6 Press ENTER/NEXT. The track is programmed. The program step number appears, followed by the total playing time. 7 To program additional tracks to be recorded on side A, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. 8 Press Pon the remote to insert a pause at the end of side A. “P” appears in the display and the total playing time resets to “0.00” in the display. 9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. 10 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ((for front side) lights up. 11 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 12 Press PPAUSE. Recording starts. To stop recording Press p. To check the order Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. Tip When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC. Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Insert a CD. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press EDIT once, so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Note You cannot use this function after programming. In order to use this function, you must first cancel the program by pressing PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. DJ Effects DJ Effects Looping part of a CD Flashing part of a CD — Loop — Flash With the loop function, you can repeat part of With the flash function, you can “flash” the a CD during playback. This lets you create CD sound during playback. This lets you original recordings. create original recordings. (Power) LOOP Jog dial (Power) FLASH Jo...

Download now

Please, enter two numbers from picture: