Login:
Votes - 1, Average rating: 3 ( )

User manual Sony, model MHC-GR7

Manafacture: Sony
File size: 937.9 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


a.¤.0) POWER 3,5 62 1 4 1 Press TUNER/BAND repeatedly 2 Turn the jog dial to set the hour. The clock is on a 12-hour system. 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off. Note When setting the time, set the wqualizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 30.) until the band you want appears in the display. Every time you press this button, the band changes as follows: North and South American, Australian and Thai models: FM .AM Other models: FM nMW nSW n 2 Press TUNING MODE repeatedly to select “AUTO”. 3 Turn the jog dial. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. TUNED STEREO MHz VOLUME AUTO 4 Press TUNER MEMORY. A preset number appears in the display. Preset number TUNED STEREO VOLUME AUTO 5 Turn the jog dial to select the preset number you want. 6 Press ENTER/NEXT. The station is stored. 7 Repeat steps 1 to 6 to store other stations. To tune in a station with a weak signal Press TUNING MODE repeatedly to select “MANUAL” in step 2, then turn the jog dial to tune in the station. To change the preset number Start over from step 1. To change the AM tuning interval (Except for the Middle Eastern model) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER/NEXT button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Connecting optional AVcomponents To enhance your system, you can connect optional components. Refer to the instructions of each component. Connecting audio components Select one of the following two connections, depending on the equipment to be connected and method of connecting. Connecting an MD deck for digital recording (except U.S. model) You can record from CD into the MD deck digitally by connecting an optical cable. To the DIGITAL IN jack of the MD deck Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. To the audio output To the audio input of the MD deck of the MD deck Note If you cannot select “MD” even when you have pressed FUNCTION, press POWER while pressing FUNCTION when the power is turned off. “VIDEO” will be switched to “MD”. To return to “VIDEO” do the same procedure. Tip If you connect a turntable with MM cartridge, connect it to VIDEO/MD IN using the optional MM cartridge equalizer EQ-2 and an audio connecting cord. To listen to the sound, press FUNCTION repeatedly until “VIDEO” appears. Connecting a super woofer speaker (except for MHC-D60) You can connect an optional super woofer speaker. To super woofer Connecting surround speakers (U.S. and Canadian models only) You can connect an optional surround speakers. To surround speaker (R) Note You need to connect both left and right surround speakers. Otherwise, the sound will not be heard. To surround speaker (L) Connecting a VCR Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, press FUNCTION repeatedly until “VIDEO” appears. To the audio output of the VCR Note If the sound is distorted when selecting “VIDEO”, switch to “MD” (see “Note” on page 8). continued Connecting optional AV components (continued) Connecting outdoor antennas Connect the outdoor antenna to improve the reception. FM antenna Connect the optional FM outdoor antenna. You can also use the TV antenna instead. Screw clamp 75-ohm coaxial cable (not supplied) AM Ground wire (not supplied) AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Screw clamp FM75 AM Insulated wire (not supplied) Ground wire (not supplied) Important If you connect an outdoor antenna, ground from yterminal with the screw clamp. To prevent a gas explosion, do not connect the ground wire to a gas pipe. 10 Basic Operations Basic Operations Playing a CD — Normal play You can play up to three CDs in a row. 21 0) a. 1/ALL DISCS VOLUME CD ( a.a..»a¤¤¤ 0) a..»a.DISC SKIP EX-CHANGE POWER bBvV P p =+ 0) VOL +/– 1 Press ¤ OPEN/CLOSE and place up to two CDs on the disc tray. If a disc is not placed properly it will not be recognized. With the label side up. When you play a single CD, place it on the inner circle of the tray. a.¤ 0)+=. To ins...

Other models in this manual:
Home Stereos - MHC-D60 (937.9 kb)
Home Stereos - MHC-GR7J (937.9 kb)
Home Stereos - MHC-RX70 (937.9 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category