Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
• You can switch from another source to the tuner just by pressing TUNER/BAND (Automatic Source Selection). • To improve broadcast reception, reorient the supplied antennas. Basic Operations 11 MHC-G202/C20. 3-859-548-12. EN Recording from the radio You can record the radio program on a tape by calling up a preset station. Use a TYPE I (normal) tape. 12 To stop recording Press p6 on deck A. Tips • To record non-preset stations, press )± or 0 repeatedly to tune in the desired station. • If noise is heard while recording an AM radio, move the AM antenna to reduce the noise. 43 1 Press TUNER/BAND to select the band you want. 2 Press PRESET + or – to tune in a preset station. 3 Press p6 and insert a blank tape into deck A. With the side you want to record on facing forward 4 Press r. Recording starts. MHC-G202/C20. 3-859-548-12. EN Playing a tape Use a TYPE I (normal) tape. 2 VOLUME 3 1 0) P 1Press p6 and insert a recorded tape in deck A or B. With the side you want to play facing forward 2 Press TAPE. “TAPE” appears in the display. 3 Press ·. The tape starts playing*. * The deck stops automatically when the playback of the tape ends. To play both decks in succession (relay play) You can listen to one side of the tapes in deck B and deck A in succession. When the tape in deck B finishes playing, the tape in deck A starts playing. 1 Press p6 on deck B and insert a recorded tape in deck B. 2 Press · on deck B. The tape on deck B starts playback. 3 Press p6 on deck A and insert a recorded tape in deck A. 4 Press P and · on deck A. The tape on deck A is paused and automatically released when the playback on deck B ends. To Do this Stop play Press p6. Pause Press P. Press again to resume play. Fast-forward Press p6 then press ). Rewind Press 0 . Remove the Press p6. cassette Adjust the Turn VOLUME (Press VOL + volume or – on the remote). Tip If you play both decks at the same time, you’ll hear the sound from deck B. Basic Operations 13 MHC-G202/C20. 3-859-548-12. EN To stop recording Press p6 on deck A and B. Recording from a tape — Dubbing Use a TYPE I (normal) tape. 2 41351 1 Press p6 and insert a blank tape in deck A and a recorded tape in deck B. With the side you want to play/record on facing forward 2 Press TAPE. “TAPE” appears in the display. 3 Press P on deck A. 4 Press r on deck A. Deck A stands by for recording. 5 Press · on deck B. The tape starts dubbing. MHC-G202/C20. 3-859-548-12. EN The CD player The CD player Playing the CD tracks repeatedly –– Repeat Play This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. 2 31 1 Press CD and place a CD on the disc tray. 2 Press REPEAT. 3 Press ·P . Repeat Play starts. Do the following procedure to change the repeat mode. To repeat Press Only one REPEAT repeatedly until track “REPEAT 1” appears in the display while playing the track you want to repeat. All the tracks REPEAT repeatedly until on the current “REPEAT 1 DISC” appears in CD the display. All the tracks REPEAT repeatedly until on all CDs “REPEAT ALL DISC” appears in the display. To cancel Repeat Play Press REPEAT so that “REPEAT”, “REPEAT 1” or “REPEAT ALL DISC” disappears from the display. MHC-G202/C20. 3-859-548-12. EN Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. 21 1 Press CD and place a CD on the disc tray. 2 Press SHUFFLE. “SHUFFLE” appears, then all the tracks play in random order. To cancel Shuffle Play Press SHUFFLE so that “SHUFFLE” disappears. Tips • You can start Shuffle Play during normal play by displaying “SHUFFLE”. •To skip a track, press )±. Note You cannot select a CD even if you press DISC SKIP while shuffle play. MHC-G202/C20. 3-859-548-12. EN Programming the CD tracks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. 2,5 3 p 71 4 (P = + p CLEAR 1 Press CD and place a CD on the disc tray. 2 Press PROGRAM. “PROGRAM” appears. 3 Press one of the DISC 1 – 3 buttons to select a CD. 4 Press )± or 0 to select a track. Selected track 1 2 3 PROGRAM PRESET EQ FLAT ROCK POPS JAZZ Selected disc 5 Press PROGRAM. The track is programmed. The last programmed track appears. 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 if you select a track from the same disc. 7 Press ·P . All the tracks play in the order you selected. To Press Program a pause · P Stop play p Cancel program p play Erase a track CLEAR on the remote in from the end stop mode Erase the entire p for more than two program seconds Tips • The program you made remains after the Program Play has finished. To play the same program again, press ·P. • “FULL” appears when you have programmed more than 32 track numbers. Playing only the beginning of each track — Music Scan The begining of each track on all the CDs in the CD tray play for 10 seconds. (P = + p M.SCAN To play only the begining of each track Press M. SCAN on the remote. Track number b...
Other models in this manual:Home Stereos - MHC-G202 (299.03 kb)