Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Notes on playing multisession discs .If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and other sessions are not played back. .A disc with a mixed CD format is recognized as a CD-DA (audio) disc. Listening to the radio 1 Select “FM” or “AM.” Press TUNER/BAND . repeatedly. 2 Select the tuning mode. Press TUNING MODE . repeatedly until “AUTO” appears. 3 Tune in the desired station. Press +/. (or TUNING +/. on the unit) .. Scanning stops automatically when a station is tuned in, and then “TUNED” and “STEREO” (for stereo programs only) appear. When you tune in a station that provides RDS services, the station name appears on the display (European model only). 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. To stop automatic scanning Press ... Basic Operations Continued . 1 GB To tune in a station with a weak signal To tune in a station with a weak signal To reduce static noise on a weak FM stereo station Press FM MODE . repeatedly until “MONO” appears to turn off stereo reception. Playing a tape Use buttons on the unit to play tape. 1 Select the TAPE function. Press FUNCTION . repeatedly to select “TAPE.” 2 Insert a tape. Press ..., and insert the tape into the cassette holder. Make sure there is no slack in the tape to avoid damaging the tape or the tape deck. 3 Start playback. Press ... Other operations To Press Pause playback ... To resume play, press .. again. Stop playback .... Rewind or fast ./... forward* * Make sure to press ... after the tape has been wound or rewound to the end. Note Do not turn off the system during playback. 1 GB Notes Recording onto a tape Use a TYPE I (normal) tape only. You can record just the portions you like from a sound source, including the USB device or connected audio components. Use buttons on the unit to control tape recording. 1 Insert a recordable tape. Press ..., and insert the tape into the cassette holder with the side you want to record facing forward. 2 Prepare the recording source. Select the desired source to record. Place the disc you want to record. When recording a folder from an MP3 disc, press PLAY MODE . repeatedly to select “ ” and then press +/.. repeatedly to select the desired folder. To record only your favorite CD tracks or MP3 files in your desired order, perform steps 2 to 5 of “Creating your own program” (page 19). 3 Start recording. Press ... The CD starts playing automatically. When recording from a connected USB device or audio component, start playing desired recording sources manually. To stop recording, press .... .If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise. .While recording, you cannot listen to other sources. .Do not turn off the system during recording. Tip We recommend that you press .. first, and then press ... to avoid noise being recorded when you stop recording. Basic Operations 1 GB Listening to music of an USB device Listening to music of an USB device B device. The audio format that can be played back by this system is MP3*. See “Playable USB devices with this system” (page 31) for a list of USB devices that can be connected to this system. * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played by this system. 1 Select the USB function. Press USB (or FUNCTION repeatedly) .. 2 Connect an optional USB device to the (USB) port .. When the USB device is connected, the display changes as follows: “READING” .“1*” * When connecting the USB device, “1” (volume label) is displayed next if recorded. Note It may take about 10 seconds before “READING” appears depending on the type of USB device connected. 3 Start playback. Press . (or USB .. on the unit) .. 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. Other operations To Press Pause playback USB ... on the unit. To resume play, press the button again*. Stop playback ... Select a folder +/... Select a file ./... Select Repeat REPEAT . repeatedly Play until “REP,” “ REP” or “REP1” appears. * When playing a VBR MP3 file, the system may resume playback from a different point. Notes on the USB device .Some time may be needed to start playback when: . the folder structure is complex. . the memory capacity is excessive. .When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. .Do not connect the system and the USB device through an USB hub. .With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. .This system does not necessarily support all the functions provided in a connected USB device. 1 GB .The playback order for the system may differ from the playback order of the connected USB device. .The playback order for the...
Other models in this manual:Home Stereos - CMT-EH25 (804.51 kb)