Login:
Votes - 4, Average rating: 4 ( )

User manual Sony, model MHC-RX100AV

Manafacture: Sony
File size: 653.35 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


To call up the personal file 1 Press P FILE (or MUSIC MENU V/v on the remote repeatedly) to display the last selected personal file. 2 Use the jog dial (or press MUSIC MENU B/b on the remote repeatedly) to select the personal file you desire. 3 Press ENTER/NEXT. You don’t need to press ENTER/NEXT when you use the remote. .‚. „0 ) POWER 432 1 Obtain the sound effect you want by using the graphic equalizer and surround effect. 2 Press P FILE MEMORY. The personal file number appears in the display. VOLUME 3 Use the jog dial to select the file number (P FILE) where you want to store the sound effect. 4 Press ENTER/NEXT. The adjusted sound effects are stored under the selected file number. The settings previously stored at this memory location are erased and replaced by the new settings. Other Features Other Features Singing along: Karaoke You can sing along with any stereo CD or tape by turning down the singer’s voice. You need to connect an optional microphone. .‚. „0 ) POWER VOLUME 3 21,5 1 Turn MIC LEVEL to 0 to turn down the microphone control level. 2 Connect an optional microphone to MIX MIC. 3 Press KARAOKE PON/MPX repeatedly to obtain the karaoke effect you desire. Every time you press the button, the display changes as follows: KARAOKE PON n MPX R n MPX L EFFECT OFF N The h indicator appears in the display when a karaoke mode is activated. To sing karaoke with decreasing the vocal level of a CD, select KARAOKE PON. To sing karaoke of multiplex CD or tape, select MPX R or MPX L. n 4 Start playing the music and adjust the volume. 5 Adjust the microphone volume by turning MIC LEVEL. When you are done Turn MIC LEVEL to 0 and disconnect the microphone from MIX MIC, then press KARAOKE PON/MPX repeatedly so that “h” disappears. Mixing and recording sounds 52 .‚ … „ » . . „0 ) … „ . » POWER 5 34 1 1 Do the above steps 1 to 5. Then, insert a tape in deck B. 2 Press FUNCTION repeatedly to select the source you desire and set it to pause mode. 3 Press r. 4 Press . 5 Press · to start playing the CD player (or tape deck A). Playback starts. Start singing along with the music. To stop recording Press p on deck B and the CD player. Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing a CD. Notes • If you press EFFECT ON/OFF or recall a sound effect, the karaoke mode is cancelled. • The instrumental sound may be reduced as well as the singer’s voice when the sound is recorded in monaural. • The singer’s voice may not be reduced when: —only a few instruments are playing —a duet is being played —the source has strong echoes or chorus —the singer’s voice deviates from the center. —the voice on the source is singing in high soprano or tenor. Falling asleep to music — Sleep Timer You can let the system turn off at the preset time, so you can sleep to the music. You can preset the time to be turned off by 10 minutes. .‚. „0 ) POWER SLEEP / Press SLEEP. Every time you press the button, the minute display (the turn-off time) changes as follows: AUTO n 90min n 80min n 70min nn 10min n OFF n AUTO … … When you choose auto The power turns off when the current CD or tape finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP once. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until “OFF” appears. Waking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 3: Setting the time”). 9 3 4,5,6,7,8 .‚. „0 ) TIMER SELECT 2 1 Prepare the music source you want to play. • CD: Insert a CD. To start from a specific track, make a program (see “Programming the CD tracks”). • Tape: Insert a tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Step4: Presetting radio stations”). 2 Adjust the volume. 3 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. 4 Turn jog dial to select DAILY 1 or 2, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. VOLUME 1 5 Set the time to start playback. Turn jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing. VOLUME 1 Turn jog dial to set the minute, then press ENTER/NEXT. The hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Turn jog dial until the music source you want appears. The indications change as follows: TUNER n CD PLAY n TAPE PLAY 8 Press ENTER/NEXT. The start time, followed by the stop time and the music source, appears, then the original display appears. 9 Turn off the power. To check the setting Press TIMER SELECT and turn the jog dial to select the respective mode (DAILY 1 or DAILY 2), then press ENTER/NEXT. To change the setting, start over from step 1. To cancel the ...

Other models in this manual:
Home Stereos - MHC-D90AV (653.35 kb)
Home Stereos - MHC-GR10AV (653.35 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category