Votes - 4, Average rating: 3.8 ( )

Manafacture: Sony File size: 1.57 mb File name: Language of manual:

Other manuals for this model:

Home Stereos - MHC-GT222 (1.55 mb)

Home Stereos - MHC-GT222 (1.54 mb)

Home Stereos - MHC-GT222 (1.58 mb)

* Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information While receiving an RDS station, press DISPLAY repeatedly. RDS information appears on the display. Other Operations 29GB Recording onto a tape — CD-TAPE Synchro Recording/Manual Recording/Sound Mixing You can record on a TYPE I (normal) tape in three ways: CD-TAPE Synchro Recording: You can record an entire disc onto a tape. Manual Recording: You can record just the portions you like from a sound source, including connected audio components. Sound Mixing: You can “mix” sounds by playing one of the components and singing or speaking into a microphone (not supplied). The mixed sound can be recorded onto a tape. 1 Load a recordable tape into the tape deck with the side you want to record facing up. 2 Prepare the recording source. Select the source you want to record. CD-TAPE Synchro Recording Press CD (RM-AMU006) or press FUNCTION +/– (RM-AMU008) repeatedly (or press CD on the unit) to select the CD function. Load the disc you want to record, and press DISC SKIP repeatedly to select the disc. To select the play mode, press PLAY MODE repeatedly in stop mode (see “To change the play mode” (page 18)). To record your favorite CD tracks or MP3 files in the order you want, perform steps 2 to 6 of “Creating your own program” (page 28). Manual Recording and Sound Mixing To record sound from a microphone, press CD (RM-AMU006) or press FUNCTION +/– (RM-AMU008) repeatedly (or press CD on the unit) to select the CD function, and do not start playing any disc in step 3. 3 Start recording. Press z and B on the tape deck at the same time. CD-TAPE Synchro Recording The disc starts playing automatically after 10 seconds. Manual Recording and Sound Mixing Start playing the recording source. If there is noise while recording from the tuner, reposition the antenna to reduce the noise. While recording, you cannot listen to other sources. Otherwise, recording stops. To stop recording Press xZ on the tape deck. Notes • We recommend that you press X on the tape deck first, then press x Z on the tape deck to avoid noise being recorded when you stop recording. • You cannot eject the disc, select another disc, track or file, pause playback or find a point in the track or file during CD-TAPE Synchro Recording. 30GB Creating your own sound effect You can raise or lower the levels of specific frequency ranges or select the surround effect, and then store the setting as “USER EQ” in the memory. Use the buttons on the unit for this operation. 1 Press PRESET EQ or GROOVE repeatedly to select the audio emphasis you want for your basic sound. 2 Press EQ BAND repeatedly to select a frequency band or surround effect setting, and then turn OPERATION DIAL to adjust the equalizer level or select the surround effect you want. Repeat this for each band you want to adjust. Frequency band Equalizer level GRO OOOOV VVE EE GR ST ST AU1 2 3 UT TTO OO TUNED TUNED MHz MHz 3 Press ENTER. “USER EQ” appears and the setting is stored in the memory. To call up the personal sound effect Press PRESET EQ repeatedly until “USER EQ” appears. To cancel the sound effect Press PRESET EQ repeatedly until “FLAT” appears. Enjoying karaoke You can sing along by connecting an optional microphone. 1 Turn MIC LEVEL on the unit to MIN to turn down the microphone volume level. 2 Connect an optional microphone to the MIC jack on the unit. 3 Start playing the music. 4 Turn MIC LEVEL on the unit to adjust the microphone volume. If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone. After you have finished, disconnect the microphone from the MIC jack on the unit. Other Operations 31GB Using the Timers The system offers three timer functions. You cannot activate both the Play Timer and the Recording Timer at the same time. If you use either with the Sleep Timer, the Sleep Timer has priority. Sleep Timer You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select “AUTO”, the system automatically turns off – after the disc stops or after 100 minutes in CD function. – after the USB device stops or after 100 minutes in USB function. – after 100 minutes in other functions. Do not select “AUTO” during CD-TAPE Synchro Recording, CD-USB Synchronized Transfer, or during the erase operation. Tip The system will not turn off automatically at the preset time when you – perform the erase operation in USB function. – play a tape. – record onto a tape. Play Timer/Recording Timer Make sure you have set the clock. Play Timer: You can wake up to disc, tuner or...

Download now

Please, enter two numbers from picture: