Votes - 3, Average rating: 4
(
)
)
|
Photos and specs Sony MHC-EC78 |
Other manuals for this model:
manual abstract
Immediately unplug the power cord, and check the turned off, disc access time is increased. To turn on High channel 2 Prepare the recording source. service shop. European and Russian models (except for the UK model): 100 W 75 W + 75 W (per channel at 8 ., 8 kHz, 10% THD) following items after “PROTECT” disappears. CD player power, repeat the procedure until “CD The UK model: 110 W 3 Press DISC SKIP . to select a disc. Select the desired source to record. POWER ON” appears. Other models: 0.5 W (in Power Saving Mode) .If your system has a voltage selector, is the voltage On placement The following are measured at AC 120, 127, 220, 240 V, 50/60 Hz Other models: 100 W Place the disc you want to record and press DISC 4 Press ./.(or ./.on the unit) . selector set to the correct voltage? .Do not place the system in an inclined position or in Power output (rated): Dimensions (w/h/d) (excl. speakers): repeatedly until the desired track number appears. SKIP . to select a disc. Low channel .Are the + and – speaker cords short-circuited? To reset the system to factory settings locations that are extremely hot, cold, dusty, dirty, or Approx. 200 . 306 . 415 mm 50 W + 50 W (at 8 ., 1 kHz, 1% THD) When recording a folder from an MP3 disc, press When programming MP3 files, press +/– . .Is anything blocking the ventilation holes on the top If the system still does not operate properly, reset the humid or lacking adequate ventilation, or subject to High channel Mass (excl. speakers): PLAY MODE . repeatedly to select “ ,” and then repeatedly to select the desired folder, and then select or back of the system? system to factory settings. vibration, direct sunlight or a bright light. 50 W + 50 W (at 8 ., 8 kHz, 1% THD) MHC-EC78 press +/– . repeatedly to select the desired RMS output power (reference): the desired file. After you have checked these above items and found Use buttons on the unit to reset the unit to its factory .Be careful when placing the unit or speakers on European and Russian models: Approx. 6.0 kg Low channel folder. Other models: Approx. 6.3 kg to be all right, reconnect the power cord, and turn on default settings. surfaces that have been specially treated (for example, 70 W + 70 W (per channel at 8 ., 1 kHz, 10% THD) Selected track or file number To record only your favourite CD tracks or MP3 the system. If the issue persists, contact your nearest with wax, oil, polish) as staining or discoloration of the High channel MHC-EC68 files in your desired order, perform steps 2 to 5 of 1 Disconnect and reconnect the power cord, and then 70 W + 70 W (per channel at 8 ., 8 kHz, 10% THD) European and Russian models (except for the UK model): Approx. 5.3 kg Sony dealer. surface may result. turn on the system. The UK model: Approx. 5.0 kg MHC-EC68 “Creating your own CD program.” .If the system is brought directly from a cold to a warm Other models: Approx. 5.3 kg European and Russian models (except for the UK model): 3 Start recording. 2 Press .., FUNCTION ., and .... at the same location or is placed in a very damp room, moisture Power output (rated): Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/FM General time. may condense on the lens inside the CD player, and 50 W + 50 W (at 6 ., 1 kHz, 1% THD) lead/AM loop antenna (1)/Speaker pads (8) Press . (record) ., and then start playing the RMS output power (reference): All user-configured settings, such as preset radio cause the system to malfunction. In this situation, Design and specifications are subject to change without notice. desired recording source. 70 W + 70 W (per channel at 6 ., 1 kHz, 10% THD) Total playing time of the The system does not turn on. stations, timer, and the clock, are deleted. remove the disc, and leave the system turned on for Messages .Standby power consumption: 0.5 W The UK model: The CD starts playing automatically after 10 seconds selected track .Is the power cord plugged in? about an hour until the moisture evaporates. Power output (rated): .Halogenated flame retardants are not used in the have passed. 55 W + 55 W (at 6 ., 1 kHz, 1% THD) certain printed wiring boards. If there is noise while recording from the tuner, . Is the voltage selector set correctly to match the local On heat buildup RMS output power (reference): .Halogenated flame retardants are not used in cabinets. 5 Press ENTER . to add the track or file to the power line voltage? 75 W + 75 W (per channel at 6 ., 1 kHz, 10% THD) reposition the appropriate antenna to reduce the .Heat buildup on the unit during operation is normal program. Other models: and is not cause for alarm. noise. There is no sound. The following are measured at AC 120, 127, 220, 240 V, 50/60 Hz 6 Repeat steps 3 through 5 to program additional While recording, you cannot listen to other sources. .Are the + and – speaker cords short-circuited? .Do not touch the cabinet if it has been used Power output (rated): tracks or files, up to a total of 25 tracks or files. CANNOT LOCK : The s...
Other models in this manual:Home Stereos - MHC-EC68 (490.3 kb)