Votes - 0, Average rating: 0
(
)
)
|
manual abstract
OR During news bulletin, press any other available source keys to execute the relevant source mode. Tuner Operations 21 English Tape Operation/Recording English IMPORTANT! – Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. – Store tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV set or speaker). Tape playback 1 Press 5 to open the tape deck door. 2 Inser t a recorded tape and close the tape door. . Load the tape with the open side down and the full spool to the left. 3 Press TAPE or TAPE1/2 on the remote control repeatedly to select tape deck 1 or tape deck 2. . The selected tape deck number is displayed. 4 Press 38 to star t playback. Stopping playback . Press 7. Changing the playback mode . Press AUTO REPLAY•RDS repeatedly to select: ONCE, AUTO REPLAY. The default setting is AUTO. AUTO REPLAY ... the tape will rewind automatically at the end of playback and replay. It will replay up to max. 10 times or until you press 9. ONCE ........................... the selected side will be played once. Rewinding or forwarding fast when playback is stopped 1 Press and hold 4 or . on the front panel (or press 1 or . on the remote control). 2 Press 7 when you reach the desired passage. General information on recording . If you don’t intend to record via the microphone, unplug it to avoid unwanted recording source. . For recording, only use tape of IEC type I(normal tape). . The recording level is set automatically, regardless of the position of the Volume,Vocal, Key control and so for th. . The type is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for seven seconds. . To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect. .Press REC in Tuner, Disc or AUX mode, press REC, and “CHECK TAPE” will scroll on the display if there is no recordable tape in tape deck 2. 22 Tape Operation/Recording English IMPORTANT! Dubbing tapes – Recording is permissible if copyright 1 Load the prerecorded tape into tape deck 1. or other rights of third parties are not . You can set the tape to the desired passage infringed upon. where recording will star t. – Recording is possible only in tape deck. 2 Press DUBBING•NEWS. Preparation for recording 1 Press TAPE (TAPE 1•2) to select TAPE 2. 2 Load a recordable tape into tape deck 2 with the full spool to the left. 3 Prepare the source to the recorded. DISC – load the disc(s) TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left. AUX•GAME – connect external equipment. When recording is in progress 1 Press DISC, TUNER or AUX•GAME to select the source. 2 Star t to play the selected source. 3 Press REC to star t recording. To stop recording . Press 9 on the system. Disc synchro recording 1 Press DISC to select the disc. . Press –/+ (i/e) to select a desired track to record. . You can record programmed tracks in the order you want. 2 Press REC to star t recording. . “REC” will flash, but the first 7 seconds of the star t passage will not be recorded. Selecting another track during recording 1 Press 2; to interrupt recording. 2 Press –/+ (i/e) to select another track. 3 Press 2; to resume recording. To stop recording . Press 9. . Recording and disc playback will stop simultaneously. . Playing and recording will star t simultaneously. . Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A for example, flip the tape to side B and repeat the procedure. To stop dubbing . Press 9. 23 Timer Operations English Setting the timer The system can switch on to CD,TUNER or TAPE mode automatically at a preset time, ser ving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level. (CD / TUNER / TAPE1/2) 5224431 1 Press and hold CLK/TIMER (or CLOCK•TIMER on main unit) until “SELECT CLOCK OR TIMER” is displayed. 2 Press + (or e on the remote control) to change the display to “TIMER” and press CLK/ TIMER again to confirm. 3 Press CD, TUNER or TAPE1/2 to select the wake-up source. CD ™ “CD XX:XX” TUNER ™ “TU XX:XX” TAPE ™ “TA XX:XX” 4 Press 4 or . (or 1 / . on the remote control) (for hours) and – or + (or i/ e on the remote control) (for minutes) repeatedly to set the wake-up time. 5 Press CLK/TIMER to store the setting. . The timer will always be switched on once it has been set. . icon remains on the display. It indicates the timer is activated. . At the preset time, the selected sound source will be played for 30 minutes before it switches to standby mode (if no button is pressed within the time fr...