Votes - 0, Average rating: 0
(
)
)
|
manual abstract
– C-120 tape is extremely thin and is easily deformed or damaged. It is not recommended for use in this system. – Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV, or speaker). . STANDBY ON MINI HIFI SYSTEM STOP•CLEARSEARCH•TUNING PLAY PAUSE PREV NEXT DUB (HSD) RECORDA. REVDIMCLOCK/ TIMERPROG BASS TREBLE wOOx TECHNOLOGY IR SENSOR SIDE VOLUME PLUS LEVEL PRESET ss BASS/ TREBLE TAPE CD TUNER AUX VEC TAPE 1•2 CD 1•2•3 CDR/DVD DIGITALSOUNDCONTROL BAND POWER SAVE RDS NEWS/TA 20 3139 116 19681 pg 01-26/C80/22-Eng 20 3/6/00, 2:24 PM RECORDING RECORDING Notes: – It is not possible to change tape side during recording. – For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02). – The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds. – The recording level is set automatically, regardless of the position of Volume, wOOx, DSC, etc. – To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect. – If “ CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening. Digital Recording via Digital Out For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc. Recording from other sources (only on tape deck 2) 1 Press TAPE ( T APE 1•2 ) to select tape deck 2. 2 Load a blank tape into tape deck 2 with the open side downward. 3 Press . or . to select the recording tape side (see Tape Side under TAPE section) . 4 Press CD, TUNER or AUX. • Start playback of the selected source. 5 Press RECORD to start recording. . The REC starts flashing. 6 Press . to stop recording. Notes: – Only a ..... or . ¶¶¶¶¶ mode is available during recording . – During recording, it is not possible to listen to another source. Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press TAPE ( T APE 1•2 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside. 3 Press . or . to select the recording tape side (see Tape Side under TAPE section) . 4 Press DUB (HSD) oncefor normal speed dubbing or twice(within 2 seconds) for high speed dubbing. . " NORMAL" (normal speed) or " FAST" (high speed) will be displayed, followed by " DUB" with " ! or @ " scrolling left or right depending on the tape side selected. . The HSD appears on the display during high speed dubbing. • Dubbing will start immediately . . The REC starts flashing. 5 Press . to stop dubbing. Notes: – Only a ..... mode is available during dubbing. – At the end of side A, flip the tapes to side B and repeat the procedure. – Dubbing of tapes is only possible from tape deck 1 to tape deck 2. – To ensure good dubbing, use tapes of the same length. – During high speed dubbing in Tape mode, the sound is reduced to a low volume. – You can listen to another source while dubbing. CD Synchro Start Recording 1 Load a blank tape into tape deck 2 and a disc into a disc tray . 2 Press CD to select CD mode. • Y ou can program the tracks in the or der you want them to be recorded (see Programming T racks). If not, select the disc by pressing CD (CD 1•2•3) and the tracks are recorded according to the order on the selected disc. 3 Press RECORD to start recording. . The REC starts flashing. • CD will star t playback automatically . 4 Press . to stop recording. One Touch Recording • For One T ouch Recor ding, as soon as you press RECORD, the current source (CD, TUNER or AUX) will be recorded on tape deck 2. 1 Load a blank tape in tape deck 2. 2 Press RECORD to start recording. . The REC starts flashing. 3 Press . to stop recording. Note: – When you press RECORD while in TAPE mode, " SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode. English 21 3139 116 19681 pg 01-26/C80/22-Eng 21 3/6/00, 2:24 PM EnglishSTANDBY ON MINI HIFI SYSTEM STOP•CLEARSEARCH•TUNING PLAY PAUSE PREV NEXT DUB (HSD) RECORDA. REVDIMCLOCK/ TIMERPROG BASS TREBLE wOOx TECHNOLOGY IR SENSOR SIDE VOLUME PLUS LEVEL PRESET ss BASS/ TREBLE TAPECD TUNER AUX VEC TAPE 1•2CD 1•2•3 CDR/DVD DIGITALSOUNDCONTROL BAND POWER SAVE RDS NEWS/TA CLOCK View Clock You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about 7 seconds. • Press CLOCK/TIMER briefly (orCLOCK on the remote control) . . " PM 10: 38 or 22: 38" (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode. ™ " -- : ::::: -- " will be displayed if the clock is not set. Note: – When the system goes into low power standby mode, the clock setting will not be displayed. 22 pg 01-26/C80/22-Eng 22 Clock Setting The clock can be set in either 12- or 24h...