Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
• Attempting to play non-MP3 files that have the “.MP3” extension may result in noise or malfunction. • If ATRAC3plus files and MP3 files are recorded on the same disc, this system plays the ATRAC3plus files first. • On a disc that has ATRAC3plus and MP3 files, do not save files in other formats and do not make unnecessary folders. • To compress a source in an MP3 file, we recommend setting the compression parameters to “44.1 kHz,” “128 kbps,” and “Constant Bit Rate.” • To record up to the maximum capacity, set the writing software to “halting of writing.” • To record to the maximum capacity at one time up on media that has nothing recorded on it, set the writing software to “Disc at Once.” Cautions when playing a disc that is recorded in Multi Session • If the disc begins with a CD-DA session, it is recognized as a CD-DA (audio) disc, and ATRAC3plus/MP3 sessions are not played back. • If the disc begins with an ATRAC3plus/MP3 session, it is recognized as an ATRAC CD/ MP3 CD, and CD-DA (audio) sessions are not played back. • The playback range of an MP3 CD is determined by the tree structure of files produced by analyzing of the disc. • A disc with a mixed CD format will be recognized as a CD-DA (audio) disc. 9GB Getting Started Hooking up the system Perform the following procedures 1 to 4 to hook up your system using the supplied cords and accessories. Right speaker Left speaker FM lead antenna AM loop antenna 1 Connect the speakers. 2 Connect the FM and AM antennas. Connect the right and left speaker cords to Set up the AM loop antenna, then connect the SPEAKER terminals as shown below. it. Plug type AL # R IMPEDANCEUSE 6-16.# 33Insert this portion Red (3) Red (Black Line) (#) Extend the FM lead antenna horizontally AM loop antenna 10GB Plug type B 4 Connect the power cord to a wall Extend the FM lead antenna horizontally AM loop antenna Plug type C North American models: Connect using the white side Other models: outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To turn on the system, press ?/1. Getting AM loop antenna Extend the FM lead antenna horizontally Connect using the brown side Note To prevent noise pickup, keep the antennas away from the speaker cords. 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system’s VOLTAGE SELECTOR for available settings. continued 11GB Inserting two R6 (size AA) Setting the clock batteries into the remote Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. When carrying this system Perform the following procedure to protect the CD mechanism. Use buttons on the unit for the operation. 1 Press ?/1 to turn on the system, then press FUNCTION repeatedly to switch the function to CD. 2 Make sure that all discs are removed from the system. 3 Hold down ILLUMINATION, and then press x and DISC1 until “LOCK” appears. 4 Unplug the power cord. Use buttons on the remote for the operation. 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly to set the hour. 4 Press ENTER. 5 Press . or > repeatedly to set the minute. 6 Press ENTER. The clock starts working. To adjust the clock 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select “CLOCK SET”, then press ENTER. 3 Do the same procedures as step 3 to 6 above. Note The clock is not displayed in Power Saving Mode (page 26). 12GB CD – Play Loading a disc Use buttons on the unit for the operation. 1 Press Z. 2 Insert discs with the label side facing forward. Check that the lever on the left side of the respective slot raises. When you play a disc, insert it with the label side forward. DISC 1 – 5 slot (for 12 cm disc only) DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Place the disc so that it is flush with the gray side of the slot, then insert it vertically. 3 Press Z. To remove discs 1 Press Z. 2 Hold down the lever on the left side of the respective slot to elevate the disc, then lift it out with your other hand. CD – Play To exchange discs during playback 1 Press DISC SKIP/EX-CHANGE during playback. 2 Remove and insert discs in any slot except that of the currently playing disc. Notes • Do not place anything (such as the remote or cords) in front of the disc tray. When opening the disc tray, it may catch and cause malfunction. • Do not use a disc with tape, seals or paste on it as this may cause malfunction. • Do not use a non-standard shape disc. • Do not load an 8 cm disc. Doing so may cause the system to malfunction. • When you eject a disc, handle the disc by its edge. Do not touch the surface. • When using the DISC SKIP/EX-CHANGE function, be sure that you do not insert a disc in the slot of the current playing dis...
Other models in this manual:Home Stereos - CMT-HPZ7 (655.49 kb)