Votes - 0, Average rating: 0
(
)
)
|
manual abstract
__________________________ Serial No. ___________________________ Connect speakers Note • Ensure that the colors of the speaker wires and terminals are matched. 1 Hold down the socket ap. 2 Insert the stripped part of the wire completely. • I nsert the right speaker wires to “R ”, left speaker wires to “ L ”. • I nsert the red/blue wires to “+ ”, black wires to “ - ”. 3 Release the socket ap. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. • Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. • Before connecting the AC power cord, ensure you have completed all other connections. 1 Connect the plug to the power socket. Install remote control batteries Caution • Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard batteries in re. • Risk of decreased battery life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. 1 Open the battery compartment. 2 Insert 2 UM-4 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. 10 EN Set clock 1 In standby mode, press and hold CLOCK on the main unit to activate the clock setting mode. » [SET CLOCK] (set clock) is displayed brie y. Then the hour digits are displayed and begin to blink. Note • I n Eco Power Standby mode, press CLOCK to show clock rst, then press and hold CLOCK to proceed clock setting. 2 Press on the main unit repeatedly to select 12 hour or 24 hour format. 3 Turn VOLUME+/- to set the hour. 4 Press CLOCK to con rm. » The minute digits are displayed and begin to blink. 5 Turn VOLUME+/- to set the minute. 6 Press CLOCK to con rm. Turn on 1 Press STANDBY-ON on the main unit. » The apparatus switches to the last selected source. Switch to standby 1 Press to switch the apparatus to standby mode. » The backlight on the display panel is reduced. » The clock (if set) appears on the display panel. To switch the apparatus to Eco Power Standby mode: 1 In standby mode, press and hold for more than 2 seconds. » The backlight on the display panel turns off. Note • If no button is pressed over 15 minutes in Standby mode, the unit goes to Eco Power Standby mode automatically and the backlight on the display turns off. EN 11 English 4 Play Play disc 1 Press CD to select the disc source. 2 Press to open the disc tray. 3 Insert a disc with the printed side facing up, then close the disc tray. » Play starts automatically. • To pause/resume play, press . • To stop play, press . • For MP3/WMA les: to select an album, press . • To skip to a track, press / . • To search within a track, press and hold / . Release to resume normal play. Play from USB Note • Ensure that the USB device contains playable audio content. 1 Flip open the USB socket cover on the front panel. 2 Insert the USB plug of a USB device into the socket. 3 Press USB to select the USB source. » Play starts automatically. • To pause/resume play, press . • To stop play, press . • For MP3/WMA les: to select an album, press . • To skip to a track, press / . • To search within a track, press and hold / . Release to resume normal play. Listen to an external device You can also listen to an external audio device through this unit. For an audio device with a headphone socket: 1 Press MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to • the M P3 LINK socket on this unit. • the headphone socket on an MP3 player. 3 Start to play the MP3 player. (See the user manual of the MP3 player) 12 EN 5 Play options Repeat and random play 1 Press REPEAT/SHUFFLE repeatedly to select: • [REP] (repeat): the current track is played repeatedly. • [REP ALL] (repeat all): all tracks are played repeatedly. • [SHUF] (shuf e): all tracks are played randomly. • [SHUF REP ALL] (repeat all randomly): all tracks are played repeatedly in random order. 2 To return to normal play, press REPEAT/ SHUFFLE repeatedly until play mode is no longer displayed. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position, press PROG to activate the program mode. » [PROG] (program) blinks on the display. 2 For MP3/WMA tracks, press to select an album. 3 Press / to select a track number, then press PROG to con rm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . • To review the program, in the stop position, press and hold PROG for more than 2 seconds. Display play information 1 During play, press DISPLAY/RDS repeatedly to select different play information. EN 13 English 6 Listen to the radio Tune to a radio station Note For optimal reception, fully e • xtend and adjust the position of the FM antenna. 1 Press TUNER to selec...