Votes - 0, Average rating: 0
(
)
)
|
manual abstract
CAUTION Visible and invisible laser radiation. If the cover is open, do not look at the beam. High voltage! Do not open.You run the risk of getting an electric shock. The machine does not contain any user- serviceable parts. Modification of the product could result in hazardous radiation of EMC or other unsafe operation. 13 English P001-P029_MCM277_22_Eng 13 2007.12.27, 16:32 Preparation English Using the remote control IMPORTANT! – Remove the protective plastic tab before using the remote control. – Always point the remote control directly towards IR area. Remove the plastic protective sheet Notes for remote control: – First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). – Then select the desired function (for example EA, 4 , .). To replace the remote controls’ battery 1 Press and hold 1 as indicated. 2 Simultaneously, pull the batter y tray at 4. 3 Remove the old battery and put a new CR2025 battery in place. 4 Put back the battery tray. 1 2 3 CAUTION! – Remove the battery if it is exhausted or will not be used for a long time. – Batteries contain chemical substances, so they should be disposed of properly. – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 14 P001-P029_MCM277_22_Eng 14 Setting the clock After connecting MCM277 to the power supply, set the clock first. 1 Press and hold STANDBY-ON/ ECO POWER to switch the set to Standby mode . The display shows the set time . -- --:-- -- flashes by default if you have not set the clock 2 In the standby mode, press and hold DISPLAY/ CLOCK on the remote control . SET CLOCK scrolls on the display . 24 HR or 12 HR appears for the initial clock setting. To select 24-hour clock or 12-hour clock, . On the remote control, press VOL +/once or more (or turn VOLUME on the set) . On the remote control, press DISPLAY/ CLOCK to confirm . The hours digits star t flashing 3 Hold down or press VOL +/- repeatedly to set the hours (or turn VOLUME on the set) 4 Press DISPLAY/CLOCK to confirm . The minutes digits star t flashing 5 Hold down or press VOL +/- repeatedly to set the minutes (or turn VOLUME on the set) 6 Press DISPLAY/CLOCK to confirm – To exit without storing the clock setting press STOP 9 Helpful hints: – The clock setting will be erased when the system is disconnected from the power supply. – The set will exit from the clock setting mode if no button is pressed within 90 seconds. –To set the clock automatically by using a time signal which is broadcast together with the RDS signal see chapter RDS: Automatic clock setting via RDS. 2007.12.27, 16:32 Basic Functions English Switching on/off the set and selecting functions 1 To switch on, press STANDBY-ON/ ECO POWER or SOURCE on the set (or y on the remote control) . The set switches to the last source selected OR On the remote control, press the source button (e.g. USB, CD, TUNER, AUX) 2 When the set is on, press STANDBY-ON/ ECO POWER to switch off (or y on the remote control) 3 To select your function, press SOURCE once or more on the set (or USB, CD, TUNER, AUX on the remote control) Helpful hints: –You can also switch on the set by pressing CD OPEN • CLOSEc Switching between Standby and ECO POWER mode 1 When the set is switched off, press and hold STANDBY-ON/ ECO POWER to switch between Standby and ECO POWER mode (or y on the remote control) In ECO POWER mode (power-saving mode): . ECO PWR scrolls on the display . The display is switched off . The Red indicator lights up In Standby mode: . The clock is displayed Helpful hints: – In the standby/Eco power mode, the tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set’s memory. Auto-standby When the set has reached the end of CD playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save power. Volume control Volume adjustment . Adjust the volume by using the VOLUME rotary on the set or by pressing VOL +/-on the remote control . VOL and the actual value (between 1 and 31) are displayed . VOL MIN is the minimum volume level . VOL MAX is the maximum volume level MUTE You can temporarily switch off the sound without switching off the set. 1 Press MUTE on the remote control to switch off the sound . MUTE appears. Playback continues without sound 2 To switch on the sound, you can: – press MUTE again; – adjust the volume controls; – change source 15 P001-P029_MCM277_22_Eng 15 2007.12.27, 16:32 English Basic Functions Sound control DSC Digital Sound Control enables you to select predefined sound settings. . Press DSC repeatedly to select the desired sound setting: ROCK, JAZZ, POP, CLASSIC DBB . Press DBB (Dynamic Bass Boost) once or more to switch bass enhancement on or off. . DBB appears if DBB is activated Displaying the clock . During playback, press DISPLAY/CLOCK on the remote control repeatedly to switch between th...