Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
. LP2 or LP4 recording has been performed. . Record in STEREO or MONO. ‹ 4LP recordings have much noise. . The disc has many scratches. . Record at normal speed. w Knowledge 78 78 MD section (list of displayed messages) Knowledge Display indication Meaning Countermeasures NO DISC . No minidisc inserted. . Insert a minidisc. . SCMS . Digital copying of a source with digital copy prohibition by SCMS has been tried. . Digital recording is not possible. . Record after switching the recording mode to "ANALOG". d fi UNLOCK . The square optical connector has become disconnected or the connection is imperfect. . An external source with a sampling frequency other than 38 kHz, 44.1 kHz, is 48 kHz is connected. . Connect the square optical connector correctly. . Connect an external source with a sampling frequency suitable for this unit. ! DISC FULL . There is no recordable area. . Recording of the 256th title has been tried. . Replace by a minidisc for recording. . It is not possible to record 256 titles or more onto one minidisc. FULL . Title input in excess of the max. character number has been tried. . Refer to "In regard to umber of characters which can be entered". „ BLANK DISC . This is a blank minidisc with nothing recorded on it. . For playback, replace by a recorded minidisc. READING . TOC *1, UTOC *2 information is being read. . This is no defect. MD WRITING . Various information is being written at the tome of editing or recording. . This is no defect. UTOC ERROR . The TOC *1, UTOC *2 contents are abnormal. . Perform "ALL ERASE". When this is not possible, replace the disc. I CAN'T EDIT . Deletion of too short titles or other editing exceeding the limitations has been tried. . The disc has been removed after recording or editing and the editing information has not been recorded. . Perform editing within the limitations. . Press the 0 key and remove the disc. "ok" is flashing. . This is the confirmation method asking "Is it OK to execute editing?". . Editing will be executed when the ENTER key is pressed. PROTECTED . The minidisc is write-protected (PROTECT). . Bring the minidisc to recordable condition (cancel the protection). s PLAY ONLY . This is a play-only minidisc. . Insert a minidisc for recording. NOT AUDIO . The input is a digital signal other than an audio signal. . Provide an audio digital signal as output from the connected external source. WAIT XX min. . After the start of CD double-speed recording, double-speed recording of the same disc has been tried within 74 minutes. . Start double-speed recording after the indicated time has elapsed. CAN'T PLAY . Playback of a minidisc which cannot be played because it is unrecorded or for other reasons has been tried. . Replace by a minidisc which can be played back. PL: SET . Title input processing is performed with an increase in the track number. . Set the LP: Stamp function to OFF. *1: All minidiscs have information called TOC (Table of Contents) recorded in addition to the audio signal. The TOC corresponds to the table of contents of a book, and it contains the information which cannot be rewritten out of the number of titles, the playback time, character information, etc. *2: The information characteristic for a minidisc for recording, other than the TOC, is called UTOC. This UTOC contains the information which can be rewritten out of the number of titles, the playback time, character information, etc. 79Specifications 79Specifications [Amplifier section] Effective output power during STEREO operation (1 kHz, 10% T.H.D., at 6 .) ................. 25 W + 25 W Rated output power during STEREO operation (DIN) (1 kHz, 0.7% T.H.D., at 6 .) ................. 20W + 20 W Frequency response .......... 30Hz ~ 60kHz (+0dB, -3dB) [MD recordre section] Laser ....................................... Semiconductor laser D/A Conversion .............................. 1 Bit D/A converter Sampling frequency ........................................ 44.1 kHz Audio compression ............................ ATRAC, ATRAC3 Digital input Optical .......................................... -15dBm ~ -21dBm [CD player section] Laser ....................................... Semiconductor laser D/A Conversion .............................. 1 Bit D/A converter Over sampling ....................................... 8 fs (352.8 kHz) Frequency response ....... 20Hz ~ 20kHz (+0.5dB, -1dB) Digital output Optical .......................................... -15dBm ~ -21dBm [Tuner section] FM tuner section Tuning frequency range ......... 87.5 MHz ~ 108 MHz AM tuner section (For U.K. and Europe) Tuning frequency range .......... 531 kHz ~ 1,602 kHz (For other countries) Tuning frequency range 9 kHz step ............................ 531 kHz ~ 1,602 kHz 10 kHz step .......................... 530 kHz ~ 1,610 kHz HD-5MD/EN [General] Power consumption .............................................. 70 W Dimensions .................................................. W: 220 mm H: 145 mm D: 356 mm Weigh...