Votes - 4, Average rating: 3.3 ( )

Manafacture: Kenwood File size: 3.43 mb File name: Language of manual:

To end recording in the middle 7 DUBBING DIsC 2 1 Select. MULTI CONTROL SET Press the ENTER Key. 2 Press SET. Perform the following operation while the CD player is in stop mode to start recording at the same time as the start of playback. Recording of an entire CD (CD RECORD) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) XD-SERIES (En) 47 Preparation section Basic section Application section Knowledge sections DIsC 2 Recording preparations are required. . (Steps 1 to 3) (For the reverse mode, select “ p” (two-way recording).) When equalizer or another effect is applied to the sound, the sound with the applied effect can be recorded. p Convenient CD recording 1Press the DUBBING key. 4Set the tape length (recording time) and press the ENTER key. Select “CD EDIT” and press the SET key. 3Select a disc and press the SET key. 2 O Even if the disc has already been selected, select the disc again. DUBBING Note 5Start edit recording. ENTER Press the ENTER Key. 1 MULTI CONTROL SET 2 1 MULTI CONTROL SET 2 ENTER MULTI CONTROL Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption of a title may not be avoidable. In such a case, the respective title will not be recorded. 1 2 CD EDI T C-60 ENTER 1 2 3 EDIT A T 01 OThe tape and CD stop automatically when recording has completed. O Press the stop (7) key to stop recording in the middle. O If you commit an error in the time entry, restart the procedure from step 1. Giving preference to the tape length over the title sequence (CD EDIT) When the tape recording time is specified, recording is executed with changing the title sequence so that no title will be interrupted when the tape direction is changed at the end of one side. Press the CD PGM key twice to cancel CD EDIT. Automatic editing of tape sides A and B CD ONE TRACK RECORD (Only during CD playback) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) XD-SERIES (En) 48 Knowledge sections Application section Preparation section CD PGM R EC Recording preparations are required. . (Steps 1 to 3) Program the desired tracks from up to 3 CD discs in the desired order and record the programmed playback onto tape. Recording the programmed titles (CD PGM RECORD) When equalizer or another effect is applied to the sound, the sound with the applied effect can be recorded. p Convenient CD recording 1Press the DUBBING key. 4Start recording. Select “CD PGM RECORD”. 3Program the desired tracks. 2 ENTER To end recording in the middle 7 DUBBING 1 Select. MULTI CONTROL SET Press the ENTER Key. 2 Press SET. 1Select tracks in the order you want to play them. (Perform step 3 on page 34.) 2Check, replace, add or delete the programmed tracks as required. (Perform step 4 on page 35.) | Scrolled display (CD PGM RECORD) CD ONE TRACK RECORD (Only during CD playback) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) XD-SERIES (En) 49 Preparation section Basic section Application section Knowledge sections 1Adjust. 2 Press the ENTER key. Effective Sound Adjustment Adjustment of balance and input level Balance........... Adjusts the balance of left and right volume. Input level.......Adjusts the volume of external equipment (video deck etc.) connected to the AUX terminal. Please adjust as required when the volume from external equipment is too high etc. This unit permits selection of equalizer and sound field playback. Please select the equalizer as desired according to the music genre. Select the sound field mode according to the desired atmosphere. Indicates the center Indicates the balance setting O Sound is not output at the MIN. position. O When SRS 3D is ON, “SRS LEVEL” (strength of the 3D effect) also is displayed. 1 3 2 MULTI CONTROL 1. Select. MULTI CONTROL SET 2. Press SET. Balance adjustment : Adjust. Press the MODE/DEMO key. Select “L/R BALANCE”. MODE /DEMO Input level adjustment : Adjusts the volume of external equipment (video deck etc.) connected to the AUX terminal. Please adjust as required when the volume from external equipment is too high etc. ENTER The left volume is decreased. The right volume is decreased. The level is decreased. The level is increased. AUX INPUT LEVEL MIN. MAX. L/R BA LA NC SRS LEVEL S.W. (Except for the XD-5...series) L/R BALANCE L--y- -R | Scrolled display (L/R BALANCE) Rear panel GND L R L R AUX OUTPUT ANTENNA FM 75W FM 300W AM AUX INPUT AUX INPUT LEVEL MIN. MAX. - - + + AUX INPUT LEVEL MIN. MAX. XD-SERIES (En) 50 Knowledge sections Application section Preparation section Listening with the desired sound (equalizer function) In addition to the 4 kinds of equalizer patterns which have been preset at the factory, 3 equalizer patterns created manually by the user can be stored in memory and re...

Download now

Please, enter two numbers from picture: