Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
.. By pressing BASS BLAST on the unit you can directly select the BYPASS or BASS BLAST sound. , Note MCD66-F0U-ARUSLL-ENG.indd 15 11. 10. 11 2:21 16 Operating 3 Operating Advanced Operations Listening to music from your external device The unit can be used to play the music from many types of external device. (Refer to the page 11) 1. Connect the external device to the AUX IN connector of the unit. 2. Turn the power on by pressing 1/!(Power). 3. Select the AUX function by pressing AUX on the unit or FUNCTION on the remote control. 4. Turn the external device and start it playing. Recording to USB 1. Connect the USB device to the unit. 2. Select a function by pressing USB, TUNER, CD, AUX on the unit or FUNCTION on the remote control. One track recording - You can record to USB after playing a file you want. All tracks recording - You can record to USB after stop. Program list recording - After showing the programmed list, you can record it to USB. 3. Start the recording by pressing R on the unit or XREC on the remote control. 4. To stop recording, press Z. Pausing recording During recording, press R on the unit or X REC on the remote control to pause recording. Press it again to restart recording. (Only Radio, AUX) To select recording bit rate and speed 1. Press R on the unit or X REC on the remote control for longer than 3 seconds. 2. Use Cc/vV on the unit or remote control to select the bit rate. 3. Press R on the unit or X REC on the remote control again to select the recording speed. 4. Press Cc/vVon the unit or on the remote control to select a desired recording speed. (Only AUDIO CD) X1 SPEED -You can listen to music while recording it. X2 SPEED -You can just record the music file. 5. Press R on the unit or X REC on the remote control to finish the setting. MCD66-F0U-ARUSLL-ENG.indd 16 11. 10. 11 2:21 Operating 17 ..You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/ WMA CD Only) ..During recording MP3/ WMA, there is no sound. ..When you stop recording during playback, the file that has been recorded at that time will be stored. (AUDIO CD Only) ..Do not remove the USB device or turn off the unit during USB recording. If not, an incomplete file may be made and not deleted on PC. ..If USB recording does not work, the message like “NO USB”, “ERROR”, “FULL” or “NO REC” is displayed on the display window. ..Multi card reader device or External HDD can not be used for USB recording. ..A file is recorded by about 512 Mbyte when you record for a long term. ..When you stop recording during playback, the file will not be stored. ..You may not store more than 999 files. ..It’ll be stored as follows. AUDIO CD MP3/ WMA The other source* * : TUNER, AUX and the like. , Note The making of unauthorized copies of copy- protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal off ense. This equipment should not be used for such purposes. Be responsible Respect copyrights 3 Operating MCD66-F0U-ARUSLL-ENG.indd 17 11. 10. 11 2:21 18 Troubleshooting Troubleshooting 4 Troubleshooting Problem Cause & Correction No Power. • The power cord is not plugged in. Plug in the power cord. • Check whether electricity failed. Check the condition by operating other electronic devices. No sound. • Check whether you select right function. Press FUNCTION and check the selected function. • Speaker cables are not connect correctly. Connect the speaker cables correctly. • The volume is set to minimum. Use the volume controller to adjust the volume. The unit does not start playback. • An unplayable disc is inserted. Insert a playable disc. • No disc is inserted. Insert a disc. • The disc is dirty. Clean the disc. (Refer to the page 20) • The disc is inserted upside down. Place the disc with the label or printed side facing upwards. Radio stations cannot be tuned in properly. • The antenna is positioned poorly. Adjust its position. • The signal strength of the radio station is too weak. Tune to the station manually. • No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). Preset some radio stations, see page 14 for details. The remote control does not work properly. • The remote control is not pointed at the remote sensor of the unit. Point the remote control at the remote sensor of the unit. • The remote control is too far from the unit. Operate the remote control within about 23 ft (7 m). • There is an obstacle in the path of the remote control and the unit. Remove the obstacle. • The battery in the remote control is exhausted. Replace the battery with new one. MCD66-F0U-ARUSLL-ENG.indd 18 11. 10. 11 2:21 Appendix 19 Specifi cations General Power supply Refer to main label. Power consumption Refer to main label. Net Weight 4.8 kg External dimensions (W x H x D) 272 x 334 x 355 mm 5 °C to 35 °C (41 °F to 95 °F) Operating conditions Tem...