Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
• If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC volume control toward minimum. To Adjust ECHO Volume You can give an echo effect to the sound from the microphones. Press the ECHO VOL. ( / ) on the remote control to increase the echo volume or decrease it. (MIN,1 - 14, MAX steps) (12HR) (24HR)or Using the wireless microphone -LM-KW6960Q model Before you use the wireless microphone, detach the cover on the rear of the wireless microphone and insert three R06 (size AA) batteries with and aligned correctly. 1 Connect the supplied wireless microphone antenna. (Page 8) 22Turn the wireless microphone on. 33Set the wireless microphone channel. (Page 8) ON ON OFF OFF ON Before Operation Before Operation Timer Function With the TIMER function you can have the radio reception, CD play, USB play and TAPE play turned on and off at the time desired. 1 Press CLOCK to check the current time. For your reference If you don’t set clock, timer function doesn’t work. 2 22Press TIMER to enter the timer setting mode. “TUNERtDVD/CD tUSBtTAPE” flash in the display window in turn. For your reference If you want to correct the previous memorized TIMER setting, press and hold the TIMER button more than 2 seconds. -The previous memorized timer setting for on Time and “ ” indicator appears in the display window. 3 33Press SET/CD[[ when the desired function flashes. 41. a.When you select TUNER function, ‘PLAY’ and ‘REC’ indicator flash in the display window alternately for about 3 seconds. ‘PLAY’ indicator : TUNER play only ‘REC’ indicator : TUNER play and recording b.Press SET/CD[[ when the desired function flashes. c.Select the previous memorized preset number by pressing . .. b bbb bb/B BBB BB > >> on the front panel and press SET. ‘ON TIME’ indicator appears for about 0.5 seconds in the display window and then disappears. 2. When you select DVD/CD, USB or TAPE function, ‘ON TIME’ indicator appears for about 0.5 seconds in the display window and then disappears. 5Set the hour to switch on by pressing . .. b bbb bb/B BBB BB > >> on the front panel. 6Press SET/CD[[ to confirm the turn on hour time. 7 Set the minute to switch on by pressing . .. b bbb bb/B BBB BB > >> on the front panel. 8Press SET/CD[[ to confirm the turn on minutes time. ‘OFF TIME’ indicator appears for about 0.5 seconds in the display window and then disappears. 9Set the hour to switch off by pressing . .. b bbb bb/B BBB BB > >> on the front panel. 10 1100 Press SET/CD[[. Set the minute to switch off by pressing . ..1 111 11 b bbb bb/B BBB BB > >> on the front panel. 12 1122 Press SET/CD[[. 13 1133 Adjust the volume level by pressing . .. b bbb bb/B BBB BB > >> on the front panel. 14 1144 Press SET/CD[[. “ ” appears in the display window and the timer setting has been completed. 15 1155 Turn the system off. The selected timer functions are automatically switched on and off at the preset times. To cancel or check the timer Each time the TIMER button is pressed you can select the timer set or cancel. You can also check the timer setting status. To activate or check the timer, press the TIMER button repeatedly so that “ ” appears in the display window. To cancel the TIMER, press the TIMER button repeatedly so that “ ” disappears from the display window. otes • If you insert the DVD or DivX except audio CD/MP3/WMA on the unit, the timer function will be operated to the TUNER. • This is not supported in the multi card reader. 14 PREPARATION 15 Before Operation Mini Glossary for Audio Stream & Surround mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of deemed audibly in distinguishable from the master (which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. “Manufactured under license from Digital Theater Systems, Inc. US Pat. No’. 5,451,942; 5,956,674; 5,974,380; 5,978,762;6 and world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All rights Reserved.” The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with “ ” mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Use this mode when playing movie or Dolby Digital 2 channel which carries the “ ” mark. This mode provides the effect of being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY P...