Votes - 2, Average rating: 3.5 ( )

Manafacture: Aiwa File size: 506.48 kb File name: Language of manual:

Push the cassette holder to close. PLAYING A TAPE Press xPLAY while the power is off. The power is turned on and play of the inserted tape begins. ZSTOP/EJECT – Stops play. The power will be automatically turned off. aPAUSE – Pauses play. To resume play, press again. fF FWD/ gREW – Fast forwards/ rewinds. To stop the winding, press Z. RECORDING Note that recording is done on only one side of the tape. 1 Insert a tape with the side to be recorded facing out. 2 Get ready to record from the source. To record from a CD, select CD and load the disc. To record from a radio broadcast, select RADIO and tune to a station. (See the following pages.) 3 Press wREC to start recording. xPLAY is pressed simultaneously. When recording from a CD, press eto start playback. To record only the selected tracks of a CD 1 Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks. 2 Press wand start CD play. To stop recording, press Z. To stop CD play, press s. To pause recording, press a. To resume recording, press again. To erase recording, press wwhile the power is off. After recording, select TAPE/6STANDBY with FUNCTION to turn the power off. To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A Tab for side A En ENGLISH 5 RADIO TAPE CD 6STANDBY FUNCTION B SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC RADIO TAPE CD 6STANDBY FUNCTION B SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC TUNER OPERATION B 1 Select RADIO with FUNCTION. The power is turned on. 2 Press sSTOP/BAND repeatedly to select the desired band. FM AM The previously tuned station is received. 3 Press r, t(TUNING DOWN, UP) to select a station. During FM stereo reception, is displayed. After listening, select TAPE/6STANDBY with FUNCTION to turn the power off. For better reception AM FM Extend the rod antenna and orient it for the best reception. The antenna is inside the unit. Position the unit for the best reception. For quick tuning (Auto Search) Hold down r, tuntil the tuner starts searching for a station. When a station is tuned to, the search stops. If the broadcast signal is weak, it does not stop. To stop the search manually, press ror t. REPEAT/MODE/OSC -If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. -If a high-pitched sound is heard during AM recording, press the button repeatedly to display “b1” or “b2”, so as to eliminate the noise. To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 1 Press sSTOP/BAND to display AM. 2 Hold down REPEAT/MODE/OSC for 5 seconds to change the interval. When the AM tuning interval is changed, the AM preset stations are cleared. NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit away. 6 ENGLISH (CSD-TD19 only) (CSD-TD19 only) Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; -high frequency sound is not emitted -the sound is not adequately high -the sound is off-balance -the tape cannot be erased -the tape cannot be recorded on After every 10 hours of use, clean the tape heads with a head cleaning cassette. Use separately sold dry-type or wet-type cleaning cassette. Refer to the instructions of the cleaning cassette for details. To clean the lens Use a cotton swab slightly moistened with cleaning fluid. Wipe gently from the center to the edge. Lens REPEAT/ PROGRAM MODE/OSC e PLAY/PAUSE r, t s STOP/BAND PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press PROGRAM once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number En Frequency 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press ePLAY/PAUSE/PRESET (ePLAY/PAUSE) repeatedly. To clear a preset station Select the preset number first. Within 5 seconds, hold down PROGRAM until “M” and the preset number disappear in the display. The higher numbers in the band are decreased by one. ENGLISH 7 RADIO TAPE CD FUNCTION C 6STANDBY SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC RADIO TAPE CD FUNCTION C 6STANDBY SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC CD OPERATION C 1 Select CD with FUNCTIO...

Download now

Please, enter two numbers from picture: