Votes - 3, Average rating: 4
(
)
)
|
manual abstract
They can be changed for playback. El To erase a recorded sound (T) Press [B/-DEMO] to select TAPE mode. CD Insert the cassette with the exposed tape facing left. ® Press [•REC/II], 0 Recording from the radio Preparations: • Wind on the leader tape. • To record from halfway through the tape Wind the tape to the point from where you want to start recording. • Press [POWER 6/1] to turn the unit on. 1 Insert the tape to be recorded on. Insert with the exposed tape facing left. 2 Tune to the required station. (* page 10 or 11) 3 Press [•REC/II] to start recording. To stop recording Press [■/-DEMO]. To stop recording temporarily Press [•REC/II]. To resume recording, press [•REC/II], □ To reduce noise while recording an AM broadcast (Beat proof function) Bv remote control only Press [FM MODE/BP] while recording. Every time you press the button: bP 1 <-> bP 2 Select the position where there is less noise. RQT6094 Recording CDs Normal recording • Tracks are recorded in the order in which they are found on the CD. • Tracks are cut in the middle when the end of the tape is reached. • You can record from any point on the tape. 1 Insert the cassette with the exposed tape facing left. 2 Press [1/-DEM0] to select the CD mode. 3 Press [OPEN/CLOSE to open the CD tray. Insert the CD with label facing upward. Press [OPEN/CLOSE A] to close the CD tray. 4 Press [#REC/II] to start recording. The recording will start from the first track. side to be recorded facing up To stop recording Press [B/-DEMO]. The recording and the CD will stop. To stop recording temporarily Press [•REC/II]. To resume recording, press [•REC/II]. To record from a specific point on a tape Before recording, advance the tape to the point from where you want to start recording. Cd ¡5 W0--5cJ Ü RQT6094 Recording operations Recording operations I/-DEMO b • REC/II % Cd OPEN/CLOSE ± /■.....-JN 4 3 I—, -- - -, if ii: ” ! 1 ; i: tl^Zni'-'J 1 *! : Si|. ZZZJI1' t^üi >#% " H.-J r ri; f^xsxyùié FT ! ]> ,.c---------J 1 I/-OEMO b 2 CD REC MODE V/REWIH< AIFtlt+l •REC/II % fri.'n"”o ■ ' fB3l ui -flEC ; ) .......I Cd iB was I? ! (Ë3) ®EC) n I cz f~l~hï~ï i\ ; Ci ZD I/—/-Li I ) I Eiaa 1-REC Recording CDs You can record the whole CD (ALL-REC) or a selected track (1-REC). A ALL-REC It is not necessary to rewind the cassette. Recording always begins from the beginning of the side facing up. Preparation: Insert a CD page 12). 1 Press [B/-DEMO] to select the CD mode. 2 Press [CD REC MODE] on the remote control so “ALL-REC” is displayed. Every time you press the button: ALL-REC —1-REC— OFF- C □ 3 4 The display shows the length of tape needed. “C........’’ indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not be recorded if the tape isn’t long enough. Insert the tape with the exposed tape facing left. Press [#REC/II] to start recording. The unit rewinds the tape, records 10 seconds of silence, and then starts recording. To stop recording Press [■/-DEMO]. The CD also stops. If a track is interrupted at the end of the side facing up Recording and CD pauses. To record the track again on the opposite side © Press [EJECT ±], flip the cassette, and insert it. © Press [•REC/II], The unit records 10 second of silence, and resumes recording from the beginning of the cut-off track. To record selected tracks © Program tracks (■♦ steps 1 to 4 on page 14). © Do steps 2 to 4 above. You cannot-use ALL-REC with repeat or random play. {-* page 13). B 1-REC Preparations: Insert a CD (* page 12) and a'cassette. Wind the tape to the point from where you want to start recording. 1 Press [■/-DEMO] to select the CD mode. 2 Press [CD REC MODE] on the remote control so “1-REC” is displayed. 3 Press [V/REW/h*«] or [A/FF/^W] to select the track you want to record. 4 Press [• REC/II] to start recording. CD plays and recording starts at the same time. To stop recording Press [¿/-DEMO]. The CD also stops. To continue recording from another CD © Press [OPEN/CLOSE ±] and insert the other CD. © Do steps 3 and 4. To record a track while it is being played © Press [CD REC MODE] so “1-REC” is displayed. © Press [•REC/II]. Recording starts from the beginning of the track and stops when the track finishes. Qj Sound Quality You can choose one of four types of sound quality. ® Heavy/XBS: Adds punch to rock © Soft: For background music © Clear: Clarifies higher sounds (d) Vocal: Adds gloss to vocal Press [PRESET EQ] to select a setting. Each time you press the button: ® Heavy/XBS —» © Soft —*•© Clear —*(3) Vocal -EQ-OFF (cancelled) <- r 1 ISBEI Changes to sound quality do not affect recordings. Q Using an external unit Listening to an external source (See page 7 for external unit connection.) © Press [POWER o/i] to turn on the unit. CD Press [AUX] to select “AUX". (D Start playback from the external source. (Refer to your equipment’s operating...