The freezer can be adjusted to fit into a cutout 83-1/2" min. to 84-1/2" max. height. Note: the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment. Product Clearances These units are equipped with a 2-position door stop. The factory set 130. door swing can be adjusted to 90. if clearance to adjacent cabinets or walls is restricted. Order WX14X99 door stop for precise settings between 90.and 130.. 2

Caution These units are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required. The water and electrical supply must be located as shown. The finished cutout width must be 35-1/2". Note: The case trim overlaps cabinets at the top and sides. Frameless cabinets may require filler strips to prevent interference with cabinet door swing. The opening width must allow for filler strips. Listed by Underwriters Laboratories Specification Created 6/08

1/4" Framed Panel Dimensions A (Width) B (Grille Height) C (Door Height) Framed Panel 33-7/8" 8-7/8" 69-5/16" IMPORTANT NOTE: Maximum weight A for the door panel is 67 pounds. Maximum total weight for the Grille Panel B assembled grille panel is 11 pounds. Door Panel C 3/4" Overlay Panel Dimensions A (Width) B (Grille Height) C (Door Height) 1/4" Backer Panel 33-7/8" 8-7/8" 69-5/16" 0.10" Spacer Panel 32-1/2" 7-5/8" 67-15/16" 3/4" Overlay Panel 34-1/8" 9" 69-9/16" For answers to your Monogram,®

Specification Created 6/08 110153

P.O. Box 520604 - Miami, Florida 33152 Warranty Information Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these important benefits: > Protect your product: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft. > Promote better products: We value your input. Your responses will hel

The freezer is not level. The door will not close property. The freezer is not level. The door is reversed and not properly installed. The gasket is dirty. The baskets are out of position. 11 SERVICE FOR YOUR FREEZER We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti freezers. With the purchase of your Avanti freezer, you can have the confidence that if you ever need additional information or assistance, t

Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. .. Electrical Connection • This freezer should be properly grounded for your safety. The power cord of this freezer is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. • Do not under any circumstances cut or remove the third ground prong from the power cord supplied. •

As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your freezer. Contraction and expansion of the inside walls may cause popping and crackling noises. The freezer is not level. The door will not close properly. The freezer is not level. The door is reversed and not properly installed. The gasket is dirty. The baskets are out of position. 10 SERVICE FOR YOUR FREEZER We are proud of our customer service organization and the network of professional service technic

The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury. The unit should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuit