8
ASSEMBLING AND PREPARING
Mounting on a wall
ENGLISH
Model
19EN33S 20EN33S
ENG
For proper ventilation, allow a clearance of 10 cm
22EN33S 23EN33S
on each side and from the wall. Detailed
VESA (A x B)
75 x 75
instructions are available from your dealer, see the
Standard screw
M4
optional Tilt Wall Mounting Bracket Installation and
Number of screws
4
Setup Guide.
CAUTION
10 cm

y Disconnect the power cord first, and then
10 cm
move or install the Monitor set. Otherwise
10 cm
electric shock may occur.

y If you install the Monitor set on a ceiling or
10 cm
slanted wall, it may fall and result in severe
injury.

y Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.

y Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.

y Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
NOTE
carefully so it will not drop.
1 Please, Use the screw and wall mount interface

y Use the screws that are listed on the VESA
in accordance with VESA Standards.
standard screw specifications.

y The wall mount kit will include an installation
2 If you use screw longer than standard, the
manual and necessary parts.
monitor might be damaged internally.

y The wall mount bracket is optional. You can
3 If you use improper screw, the product might be
obtain additional accessories from your local
damaged and drop from mounted position. In
dealer.
this case, LG Electronics is not responsible for

y The length of screws may differ depending
it.
on the wall mount. Be sure to use the proper
length.
4 VESA compatible.

y For more information, refer to the
5 Please use VESA standard as below.
instructions supplied with the wall mount.

y 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm

y 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad
and screws.

---

...

Other models in this manual:
Displays - 19EN33S-B (6.12 mb)
Displays - 20EN33S (6.12 mb)
Displays - 20EN33S-B (6.12 mb)
Displays - 23EN33S (6.12 mb)