Votes - 2, Average rating: 4
(
)
)
|
manual abstract
A professional grade video decoder is available as an option which gives outstanding composite and YC video performance through the use of a 4-line comb filter and vertical noise reduction algorithm. This option also adds a selectable RGB/YUV component video input. SDI serial digital video with PAL or NTSC timings is also available as an additional option. A lower cost standard grade video decoder is also available for less demanding applications. High performance scaling algorithms work without compromising image quality or resolution irrespective of the signal resolution implemented. It is compatible with Composite and Y/C (SVHS, S-video) inputs with automatic detection of PAL, NTSC & SECAM video, and/or most computer RGB signals from 640x350 up to 1024x768 (model with 800x600 panel) or 1280x1024 (model with 1024x768 panel). Very flexible wide-ranging picture controls are provided via an on-screen menu. These controls include picture size/position controls as well as contrast, brightness, and colour/hue for video. PremierView10ID panel options are either a 1024x768 or an 800x600 10.4" NEC panel. Both feature wide viewing angles and bright images. All image scaling is performed at 24-bit per RGB pixel data width, it is then converted to 18-bits using an adaptive high-performance conversion algorithm. This ensures maximum colour depth and accurate grey-scale reproduction, with no field merging, no field dropping or repetition and no pixel or line dropping to ensure accurate motion reproduction and clean image scaling. PremierView10ID comes as a metal cased display unit or an OEM open chassis module. The metal cased display unit incorporates side mounting points and VESA-compatible rear mountings. Cased units include an anti-scratch, anti-glare front viewing window. Touchscreens are also available to special order. Optional accessories include a desk stand, wall mounts and telescopic arm mount. Technical Information Panel Specification: Viewable image size 26cm/10.4" nominal. Panel resolution 1024x768 or 800x600 depending on model. Colour depth - 6 bits per colour, 18-bits total, Viewing angles 1024x768 panel deg 60L/R, 45U/60D, 800x600 panel deg 50L/R, 35U/45D. Panel brightness 1024x768 panel 300cd/m2 nominal, 800x600 panel 280cd/m2nominal. Panel contrast ratio 300:1 typical. Signal compatibility: Input 1 – computer RGB via 15HDD socket. Model with 1024x768 panel supports incoming resolutions from 640x350 up to 1280x1024. Model with 800x600 panel supports incoming resolutions from 640x350 up to 1024x768 . (Note: Incoming sesolutions above actual panel resolution are supported via image downscaling to fit the panel. There may be a slight loss of image quality in downscale mode.) All resolutions are supported up to 70Hz refresh, some modes may also be supported up to 75Hz. Syncs: separate TTL/5V positive or negative, negative combined sync TTL level, or negative sync on green consisting of 0.3V sync and 0.7V video. Input 2 – composite video via BNC PAL, NTSC or SECAM, automatic standards detection. Pro Video model has automatic enhanced- bandwidth monochrome mode. Input 3 – YC/S-Video via 4-pin Mini-DIN PAL, NTSC or SECAM, automatic standards detection. Input 4 – Pro Video Option Only RGB or YUV component video via 9-way D connector. Input 5 – Pro Video with SDI Option Only SDI Serial Digital Video via BNC. Input 6 – DVI Option Only DVI Digital Visual Interface, DDC2B compatible for connection to DVI compatible graphics cards. DVI subject to MOQ on 10.4" models. Touchscreen option: Resistive touchscreen with RS232 serial controller available to special order. Touchscreen has antiglare finish, fitted in place of anti-scratch anti-glare viewing window. Touchscreen option subject to MOQ on 10.4" models. Power requirement: 12VDC at approximately 25W with 800x600 panel, approximately 30W with 1024x768 panel. An optional mains PSU is available. Other power options available to order include ground isolated 12VDC, 24VDC and, 28VDC with optional industrial or military grade power filtering. These options may be subject to MOQs. Model numbers: 26vLCD16 xx N zz | | | | | |-M3 = industrial metal case | | |-SC = open chassis | | | |-01 = VGA analogue only | |-02 = VGA analogue + DVI | |-03 = VGA analogue & Std Video | |-05 = VGA analogue & Pro Video | |-06 = 05 + DVI | |-09 = 05 + SDI Video | |-10 = 05 + DVI + SDI Video | |-11 = Standard video only | |-13 = Professional video only | |-14 = Pro Video + SDI | |-S = 800x600 panel |-X = 1024x768 panel Dimensions and Weights: Metal cased models Size 281x240x50mm excluding connectors Unit weight 3Kg, Shipping weight TBA Kg Open chassis models Size TBA mm Unit weight approx 1.5Kg, Shipping weight TBA Calibre UK Ltd Cornwall House, Cornwall Terrace, Bradford, West Yorkshire BD8 7JS, England Tel +44 (0)1274 394125 Fax +44 (0)1274 730960 E-mail sales@calibreuk.com Web-site Issue4.21 E&OE specifications subject to change without notice 10/12/07 All trademarks ackn...