Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
This technique practically eliminates internal light reflection, which directly improves viewing quality. Additionally, sealing the display with AR Bonding™ Technology greatly enhances its structural integrity, providing superior shock protection and dually eliminating the possibility of trapped moisture between the LCD and cover glass. This not only reduces troublesome fogging in humid and moist conditions, it keeps condensation and wetness away from your LCD. Reducing the effect of ambient light reflection on your display can dramatically improve its performance! When AR Bonding™ Technology is applied to a 250 nit display, it can increase the effective contrast and provide the enhanced daylight viewing equivalent to that of a 500 or 600 nit display without AR Bonding™ Technology. Minimizing refracted ambient sunlight to the LCD yields a discernable increase in display performance. ` 1.3 Product Safety and Regulatory Information To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside this unit. Do not disassemble the unit— there are no user-serviceable components inside the monitor’s enclosure. Please contact CyberResearch, Inc. for repair. This equipment is not intended for use in critical applications where its failure to operate would create immediate life threatening circumstances. Applications including, but not limited to nuclear reactor control, aerospace navigation systems and life support systems are not appropriate for this product. The CYRAQ 21 should be mounted in a suitable cabinet or enclosure. The NEMA rating for this product is applicable only when the product is properly set up and installed. FCC Notice: The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. European Notice Products with the CE marking comply with the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: • EN55022:1998+A1:2000 - Radio Frequency Interference • EN55024:1998 - Electromagnetic Immunity of Information Technology Equipment • EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics • EN61000-3-3:1995 - Voltage Fluctuations 1.4 Specifications Display Display Type LCD flat panel Video Input Types Standard analog VGA (15-pin) DVI (Digital Visual Interface) Screen Size (viewable area, diagonal) 21.3" Display Filter Screen Size 20" and larger Display Brightness 250 nits (High-Bright) Display Filter Brightness High-bright (250 to 340 nits) Resolution, max. 1600 x 1200 pixels Display Special Features • Optimum Resolution: 1600x1200 @ 60Hz • Max. Resolution: 1600x1200 @ 60Hz • Supports: 1280x1024, 1024x768, 800x600, and 640x480 Maximum Number of Colors 16 million colors Maximum Color Depth in Bits 24-bit color Contrast Ratio 500:1 Auto-Sizing to Fill Screen Yes Viewing Angle ° Horizontal 170° ° Vertical 170° Scanning Frequency Vertical 56Hz....75Hz Horizontal 30KHz....93KHz Vertical (digital signals) 56Hz....75Hz Horizontal (digital signals) 30KHz....81KHz Dot Pitch 0.27mm Backlight Type CCFT Chassis Mounting Configuration Rack-mount (EIA 19") Panel-mount Desktop / benchtop Wall-mount Swivel-arm mount Protection Rating NEMA 4 sealed front panel IP65 (dustproof, most low-pressure jets of water) Display Filter Protection Water-Resistant (NEMA 4/12, IP65) Front Panel Material Stainless steel Chassis Material Stainless steel Height, Rack Units 9U (15.75") Front Panel Color Stainless steel Custom Color Options Custom color available (min. qty: 50) Chassis Special Features Features an ultra-compact, corrosion-resistant enclosure of heavy-duty stainless steel (304 SS). All models come with a water-resistant sealed front panel suitable for washdown. Built- in Poron® gasket seals between re...