Votes - 0, Average rating: 0
(
)
)
|
manual abstract
MagicRMS Pro Agent refers to Agent. 392 Using "Windows Embedded Standard 7" (TX-WN) 2 2 Using "Windows Embedded Standard 7" (TXWN) 2.4.3 MagicRMS Pro Server MagicRMS Pro Server is a core component of MagicRMS Pro. The Server connects to Database and Console and sends a command to perform a task requested by the user to network monitors where the Agent is installed. A task requested from the Console is saved in the Database. The saved task is forwarded to the Agent over the Server and performed on the network monitors. 2.4.4 MagicRMS Pro Database MagicRMS Pro Database keeps information needed to manage network monitors. 2.4.5 MagicRMS Pro Console Manage network monitors and organize task requests using the Console. 2.4.6 PXE PXE is a standard protocol that allows the Server and Client to communicate to enable the Client to boot over a network using DHCP and TFTP. Booting the system over a network enables a Diskless booting where the system can be operated regardless of the operating system. It also allows the system operating system to be restored or backed up over the network. 2.4.7 MagicRMS Pro Agent MagicRMS Pro Agent is installed on a network monitor to perform tasks requested from the server and send the network monitor information to the server periodically. For further details on how to use the MagicRMS Pro Agent, see help for MagicRMS Pro Agent. 402 Using "Windows Embedded Standard 7" (TX-WN) 3 3 Wireless Network (optional) 3.1 Connecting to a wireless LAN using Windows If there is an AP nearby, conveniently connect to a wireless LAN using the wireless LAN access method provided by Windows. 1 Click the Network connection icon on the task bar. Select an AP to connect from the displayed list of available APs. The Connect button appears. AP list 2 Click Connect. If the network key is configured for the AP to connect, enter the network key and click Connect. To obtain the network key, contact the network manager. 3 Use the wireless network as desired. 413 Wireless Network (optional) 3 3 Wireless Network (optional) 3.2 Successful wireless LAN connection The wireless LAN icon on the task bar as shown below indicates that it is correctly connected to the Internet. 3.3 Failed wireless LAN connection 3.3.1 Failed to connect to a wireless LAN The " " mark in place of the wireless LAN icon on the task bar indicates that the wireless LAN is disabled or there is no AP nearby. The mark can also means that the wireless LAN is disconnected. 3.3.2 Internet connection is not available The mark in place of the wireless LAN icon on the task bar indicates that Internet access is not available. In this case, make sure the network address is correct. Contact the network manager. If required, configure the network address again. 423 Wireless Network (optional) 3 3 Wireless Network (optional) 3.3.3 An AP is found but Internet access is not available This issue may occur when a higher priority is given to a wireless LAN AP with low signal strength. Click an AP with higher signal strength and try again. Currently connected AP, signal strength is low AP that has high signal strength 433 Wireless Network (optional) 4 4 Troubleshooting Guide 4.1 Requirements Before Contacting Samsung Customer Service Center 4.1.1 Check the following. Installation issue The product cannot power on. Check that the power cable is connected properly. (Refer to "2.2.7 Connecting the Power") Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume in the audio settings program. 444 Troubleshooting Guide 5 5 Specifications 5.1 General Model Name TX-WN Power Supply This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Video signal DVI-I OUT, DVI-D OUT Server connector LAN, Wi-Fi Speaker 1 W x 2 Dimensions (W x H x D) / Weight With cradle Vertical Type : 91.8 X 217.8 X 166.3 mm / 3.6 X 8.6 X 6.5 inches / 907g / 2.0 lb Horizontal Type : 210 X 54.8 X 122 mm / 8.3 X 2.2 X 4.8 inches / 907g / 2.0 lb Without cradle 210 X 47.5 X 122 mm / 8.3 X 1.9 X 4.8 inches / 867g / 1.9 lb Cradle 91.8 X 13 X 166.3 mm / 3.6 X 0.5 X 6.5 inches / 40g / 0.09 lb USB USB 2.0 x 4 (Down stream) USB 3.0 x 2 (Down stream) Environmental considerations Operating Temperature : 50.F ~ 104.F (10.C ~ 40.C) Humidity : 10 % – 80 %, non-condensing Storage Temperature : -4.F ~ 113.F (-20.C ~ 45.C) Humidity : 5 % – 95 %, non-condensing The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. [Recommendation] - EU Only • Hereby, Samsung Electronics, declares that this [Thin Client] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. • The official Declaration of Conformity may be found at go to...