Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location. • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. 2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature. 5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage. 6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: • Monitor-to-PC signal cable is frayed or damaged. • Liquid spills onto the LCD monitor or the monitor is exposed to rain. • The LCD monitor or case is damaged. Attaching the monitor to the base 1. Remove the monitor base from the packaging and place it on a stable and level workspace. 2. Remove the monitor from the packaging. 3. Align the release button at the buttom of the monitor with the corresponding slot at the bottom of the base. A clicking sound signifies that the monitor has been securely attached to the base. Connecting YourMonitor to a Computer 1. Turn off your monitor and unplug your computer’s power cord. 2. 2-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 2-2 Connect Digital Cable (Only Dual-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 3. Connect the Audio Cable. (Only Audio-Input Model) (Optional) 4. Insert the monitor power cable into the power port at the back of the monitor. 5. Plug the power cords of your computer and your monitor into a nearby electrical outlet. External Controls AUDIO IN VGA INDVI-D IN DVI D-Sub AUDIO IN VGA INDVI-D IN No. Icon Item Description 1, 2 Power button/ indicator Turns the monitor on/off. Blue indicates power on. Amber indicates standby/power saving mode. 3, 4 / Minus / plus If the OSD is active, press the Minus or Plus button to toggle between the OSD options. 5 OSD functions Press to view the OSD. Press again to enter a selection in the OSD. 6 Auto adjust button / exit If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press Auto and the monitor will automatically optimize the display position, focus, and clock of your display. 7 Empowering key Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. English LCD Monitor Quick Setup Guide Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur i...