Votes - 0, Average rating: 0
(
)
)
|
Photos and specs LG 24EB23PM |
manual abstract
IPS LED MONITOR MODEL 24EB23PM ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 -Attaching the Stand Base 5 -Detaching the stand base 6 -Detaching the stand body 6 -Using the cable holder 7 -Mounting on a table 7 -Adjusting the angle 8 -Adjusting the stand height 8 -Using the Kensington locking device 9 -Swivel stand 9 -Using the Pivot function 10 -Mounting on a wall 11 UsInG tHe MonItoR set 11 Connecting to a PC 11 -D-SUB connection 11 -DVI-D connection 13 -Peripheral device connection 14 CUstoMIZInG settInGs 15 Customizing Settings 15 -Menu Settings 16 -Picture 17 -Color 18 -Display 19 -Others 20 MY KEY Setting 21 FUNC. Setting 21 -Picture Mode 22 -SUPER ENERGY SAVING 23 -DUAL DISPLAY 23 -DUAL WEB 24 -MY KEY Setting 25 tRoUBLesHootInG 27 sPeCIFICAtIons 27 24EB23PM 28 Preset Modes (Resolution) 28 Indicator 29 PRoPeR PostURe 29 Proper posture for using the Monitor set. 3 ENEGNLGISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. y yDo not use any unapproved accessories to ensure the safety and product life span. y yAny damages or injuries by using unapproved accessories are not covered by the warranty. y yThe accessories supplied with your product may vary depending on the model. y yProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE Stand Base CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) ( Depending on the country ) Power Cord DVI-D Cable (This cable is not included in all countries.) One Screw Cable Holder Audio Cable ASSEMBLING AND PREPARING 4 Parts and buttons ENGENGLISH (Power Button) Power Indicator yLED On : Power is on y LED Off: Power is off Front Side Buttons Input Connectors (See p.11 to 13) 5 ENEGNLGISH ASSEMBLING AND PREPARING Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Body Stand Base Stand Body y yTo protect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to secure the stand base. 2 Check the position (at the front and rear) of the stand body, then mount the stand base on the stand body as shown in the figure. Caution Stand Base y yThe components appearing in the illustrations may look different from the actual product. y yDo not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury. y yTo avoid damaging the screen when lifting or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnecessary pressure on the screen. y yOnly remove the tape and the locking pin when the monitor is mounted on the stand base and is in an upright position. Otherwise, the stand body may protrude, which may lead to injury. Detaching the stand base 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body. Caution 6 ASSEMBLING AND PREPARING ENGENGLISH Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. Using the cable holder 1 2 3 Fix the Knob (Cable holder) to the Hole(Hingebody). Use one screw to fix the Cable Holder and monitor set. Close the Cable holder. ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle 1 Lift the monitor and place it on the table in an 1 Place the monitor mounted on the stand base upright position. in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 20° backwards for a comfortable viewing experience. yTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below. yBe careful not to touch or press the screen area when adjusting the angle of the monitor. WARnInG 2 3 Press the (Power) button on the front of the monitor to turn on the monitor. 10 cm 10 cm 10 cm 10 cm yUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock. CAUtIon Front side Rear side 1 2 Connect the Power cord to the monitor, then plug the power cord into the wall outlet. (Before connect please check the “ON/OFF” knob in “O” state). Press the “ON/OFF” knob in “ ” state (Open the power). .............. ENGENGLISH ENGENGLISH ENGENGLIS...
Other models in this manual:Displays - 24EB23PM-W (8.1 mb)