Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Click the Frame Manager icon to run the setup file. 2. Click Next. 3. Select I agree to the terms of this license agreement and click Next. 4. Click Next. Install the Application first before connecting the Digital Photo Frame to a PC. To Install the Frame Manager Software and USB Secondary Display - 5. Click Install. 6. Click Finish to restart your computer. The installation is completed. 7. To use the Samsung Digital Photo Frame as USB Secondary Display - Go to Control Panel -> Display -> Settings ->Select Samsung Mini-Monitor Display Card. Check Button "Extend my windows desktop on to this monitor" 8. Press "Ok" or "Apply". When the PC is restarted the Frame Manager icon will appear in system tray. Applicable for Windows XP users only. NOTE : Never make this as primary monitor. | Installation | Installing USB driver | Installing USB driver 1. Connect the larger "standard USB" connector to the USB port of the PC. Connect the smaller "mini-USB" connector to the "PC" connector of the Samsung Digital Photo Fame. Now Switch on the device (Samsung Digital Photo Player) and connect the USB cable (provided in the box with the unit) to the PC. 2. Select "No, not this time" button. 3. Click on "Next" button. 4. Click on "Next" button. 5. Select "Install from a list of specific location (Advanced)". Click on Next button. 6. Select "Search for the best driver in these locations" option. Check "Include this location in the search:" Now click on "Browse" button to select the directory where the Frame Manager software is installed. (Refer to Frame Manager Installation step 3). 7. Now press "Next" button. 8. Press "Continue Anyway" button. 9. Press "Finish" button. 10. Now the system is ready to be used. The Default Mode of the Samsung Digital Photo Frame is a Photo Album. To use the Digital Photo Frame as a secondary USB Monitor or USB Mass Storage device, follow the instructions below. How To Use Digital Photo Frame As Mini-Monitor If USB cable is not connected and Digital Photo Frame is switched on, it starts working as a Photo Album. To use the Samsung Digital Photo Frame device as a secondary USB Monitor, first install the Frame Manager on the Windows XP computer. (Follow the Frame Manager Installation Guide for installation). Use the USB cable to connect the computer’s USB port to the Digital Photo Frame’s USB port. On Samsung Digital Photo Frame, the following screen will appear: Select Mini-Monitor option by clicking the button. On the device desktop will appear. In Frame Manager System tray menu, Mini-Monitor menu item will appear disabled (i.e. the current mode) and Mass Storage menu item will appear enabled. How To Use Digital Photo Frame As Mass Storage If USB cable is connected to PC, Disconnect and connect again. Following screen will be shown on Digital Photo Frame. Select Mass Storage option by clicking the button. Use left-right(button 5 and button 6 in above figure) button on device for selection and by pressing ENTER button (button 8 in abo...