Votes - 0, Average rating: 0
(
)
)
|
manual abstract
DVI INRGB INDP IN POWER IN HDMI IN POWER INRGB IN AUDIO IN/OUT OUT IN DP IN HDMI IN RGB IN AUDIO IN/OUT OUT IN POWER IN Port Ports Connect the power cord for your monitor to the POWER IN port on the back of the product. Connect to a PC using the D-SUB cable. Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. Connect to a source device using an HDMI cable. The [HDMI IN] terminal is supplied for the HDMI-dedicated models only. 231 Preparations 1 1 Preparations Port Ports Connects to a PC using a DP cable. The [DP IN] terminal is supplied for the DP-dedicated models only. IN Connect to an audio-input source using an audio cable. Applicable to the models that have speakers only. OUT Connect to an audio output device such as headphones. Applicable to the models that have speakers only. Connect the port of the monitor and the USB port of the computer with the USB cable. Applicable to the stand models that have USB ports only. 241 Preparations 1 1 Preparations 1.2.3 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports Connect to a USB device. Applicable to the stand models that have USB ports only. 251 Preparations 26 1 Preparations 1 Preparations 1.3 Installation 1.3.1 Attaching the Stand . Disassembly is the reverse order of assembly. . The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Do not remove the fixing pin until you are finished attaching the stand. Insert the stand base into the stand in the direction of the arrow. Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base. After installing the stand, place the product upright. You can remove the fixing pin and adjust the stand now. - Caution Do not hold the product upside down only by the stand. 27 1 Preparations 1 Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. . To adjust the height, remove the fixing pin. . The monitor tilt and height can be adjusted. . Hold the top center of the product and adjust the height carefully. 1.3.3 Rotating the Monitor You can rotate your monitor as shown below. . Be sure to fully extend the stand before rotating the monitor. . If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged. . Do not rotate the monitor counterclockwise. The monitor may get damaged. 0(±5mm) ~ 130mm(±5mm) 4 22"-24" 27" 1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten the screw from the back of the product. Lift and detach the stand. Installing a Wall-mount Kit or Desktop Stand 1 A2 3 B4 A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. 281 Preparations 1 1 Preparations Notes • Using a screw longer than the standard length can damage the internal components of the product. • The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. • Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. • Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. • To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm or farther away from the wall. • Be sure to use a wall-mount kit that complies with the standards. • To install the monitor using a wall mount, disconnect the stand base from the monitor. 1.3.5 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subj...
Other models in this manual:Displays - S22C650K (4.32 mb)
Displays - S22C650X (4.32 mb)