Login:
Votes - 1, Average rating: 5 ( )

User manual LG, model W2252TE-PF

Manafacture: LG
File size: 1.24 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to thescreen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. A2 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Stand Body Hinge Body 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. Stand BodyStand Base 4. Insert the Cable Deco Cover in the Stand Body in the correct direction. Stand Base Cable Deco Cover Cable Deco Cover Stand Body 5. Once assembled take the monitor up carefully and face the front side Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. A3 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. 3. Slide the Cable Deco Cover out from the stand body. 4. Press the hook, Take off the stand base from stand body. 5. Please pull the stand body lightly to separate it from the hinge body. Important Your monitor may differ from the items shown in the picture. A4 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5°~20° Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A5 A6 Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to . 3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2 Connecting the Display Wall-outlet type Power Cord Analog signal D-sub Digital signal DVI A B C Connect DVI Cable Connect Dsub Cable (PC) Connect Dsub Cable (Mac) PC-outlet type Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. DVI-D(This feature is not available in all countries.) Signal Cable Fix the power cord & signal cable as shown in the picture. 2. Insert the Cable Deco Cover in the Stand Body in the correct direction. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Control Panel Functions Front Panel Controls Control Function MENU Button Use this button to enter or exit from the On Screen Display. FUN Button Use this button to enter EZ ZOOMING, 4:3 IN WIDE, PHOTO EFFECT, SOUND items, for more information, refer to page A15-A16. Use this button to enter On Screen Display Sub-menu to adjust BRIGHTNESS directly. OSD LOC...

Other models in this manual:
Displays - W1952TE (1.24 mb)
Displays - W1952TE-PF (1.24 mb)
Displays - W2252TE (1.24 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category