Votes - 4, Average rating: 4.3 ( )

Manafacture: LG File size: 534.83 kb File name: Language of manual:

If any items are missing, contact your dealer. Connecting the Display Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1.Adjust the position of the panel in various ways for maximum comfort. Tilt Range: 10°~30. 10 30 Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the backward tilt angle of the monitor should exceed 10 degrees. A5 Connecting the Display Connecting the Display Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2. NOTE A B This is a simplified representation of the rear view. Connect D-sub Cable (PC) This rear view represents a general model; your display may differ from the view as shown. Connect D-sub Cable (Mac) Or Power Cord Varies according to model. Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Signal Cable Wall-outlet type Wall-outlet type 2.Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. ...................................................................................................................... NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A6 Control Panel Functions Control Panel Functions Front Panel Controls 4:3 in WIDE/ FunctionControl MENU Button Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. The message "OSD LOCKED" appears. You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears. A7 A8 Control Panel Functions FunctionControl This Indicator lights up as white when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. Use this button to turn the display on or off.Power Button Power Indicator Use this button to select an icon in the On Screen Display. AUTO/SET Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is: W1930S: 1360 x 768 W2230S: 1920 x 1080 Buttons Use these buttons to select or adjust functions in the On Screen Display. (4:3 IN WIDE) For more information, refer to page A12.Button Button To select the image size of the screen. • WIDE: Switch to full screen mode according to input image signal. • 4 : 3: Change the image signal ratio into 4:3. WIDE 4:3 ( ) A8 Control Panel Functions FunctionControl This Indicator lights up as white when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. Use this button to turn the display on or off.Power Button Power Indicator Use this button to select an icon in the On Screen Display. AUTO/SET Button AUTO IMAGE ADJUSTMENT When adjusting your display settings...

Download now

Please, enter two numbers from picture: