Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Power Button & Power Indicator When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. (Only E1941T/E2041T/E2241T/E2341T/E2441T ) (SOURCE Hot key) Exit the OSD(On Screen Display). EXIT Button The power indicator stays blueif the display is running properly (On Mode). If the display is in Sleep Mode,the power indicator is blinking blue. 11 2 e n . s. / / . n 1 2 3 4 On Screen Display(OSD) Selection and Adjustment On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB DVI-D : D-SUB(Analog signal) input : DVI-D(Digital signal) input Main menu Sub-menu Supported input Description MENU BRIGHTNESS DSUB DVI-D To customize the screen status for a user's operating environment To adjust the brightness of the screen To adjust the contrast of the screen To adjust the image size To customize the color of the screen ORIGINAL RATIO COLOR TEMP (PRESET/USER) CONTRAST LANGUAGE FACTORY RESET SUPER ENERGY SAVING ON DSUB DVI-D Turn on the SUPER ENERGY SAVING function. OFF Turn off the SUPER ENERGY SAVING function. RESET Initialize the SUPER ENERGY SAVING and set to "OFF" mode. NOTE The order of icons may differ depending on the model (13~18). 13 , 14 15 Turn on the SUPER ENERGY SAVING function. Turn off the SUPER ENERGY SAVING function. Now the monitor is LED SAVING function. Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. 17 SAVING DATA(W/h) : 19 inch 20 inch 22 inch 23 inch 24 inch Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. 18 Troubleshooting Check the following before calling for service. 19 No image appears Do you see a "OSD LOCKED" message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current contr...
Other models in this manual:Displays - E1941S-BN (4.88 mb)
Displays - E1941T-BN (4.88 mb)
Displays - E2041S-BN (4.88 mb)
Displays - E2041T (4.88 mb)