Votes - 5, Average rating: 3.8 ( )

Manafacture: LG File size: 2.64 mb File name: Language of manual:

LED LCD MONITOR MODEL E1942S E2042T E2042S E2242T E2242S E2342T E2442T ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 -Attaching the Stand Base 5 -Detaching the Stand Base 6 -Mounting on a table 6 -Using the cable holder 8 -Mounting on a wall 9 USING THE MONITOR SET 9 Connecting to a PC 9 -D-SUB connection 9 -DVI-D connection 11 CUSTOMIZING SETTINGS 12 Customizing Settings 12 -Menu Settings 13 -PICTURE 14 -COLOR 15 -DISPLAY 16 -OTHERS 17 SUPER ENERGY SAVING Setting 18 PICTURE MODE Setting 19 TROUBLESHOOTING 21 SPECIFICATIONS 21 E1942S 22 E2042S 23 E2042T 24 E2242S 25 E2242T 26 E2342T 27 E2442T 28 Preset Modes (Resolution) 29 Indicator 30 PROPER POSTURE 30 Proper posture for using the Monitor set. ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. yDo not use any unapproved accessories to ensure the safety and product life span. yAny damages or injuries by using unapproved accessories are not covered by the warranty. yThe accessories supplied with your product may vary depending on the model. yProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE Stand Body Stand Base CD(Owner's Manual) / Card D-SUB Cable DVI-D Cable (E2042T/E2242T/E2342T/ E2442T) (This cable is not included in all countries.) ( Depending on the country ) ( Depending on the country ) Power Cord AC-DC Adapter AC-DC Adapter or ENGENGLISH ASSEMBLING AND PREPARING 4 Parts and buttons ENGENGLISH Power Indicator yLighting On: Turned on yLighting Off: Turned off Connection panel (See p.9) Button (See p.11) (Power Button) 5 ENEGNLGISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Stand Base Stand Base Stand Body Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 6 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. 10 cm 10 cm 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION Cable holder or ASSEMBLING AND PREPARING 7 Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. WARNING Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. NOTE Front Rear The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. NOTE ENGENGLISH ASSEMBLING AND PREPARING 8 ENGENGLISH Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might ...

Download now

Please, enter two numbers from picture: