|
Other manuals for this model:
manual abstract
• Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • The screen blinks. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. Specifications E1940T Display 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Sync Input Horizontal Freq. 30 kHz to 61 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Composite, Digital Video Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Analog) Power Consumption On Mode : 17 W(Typ.) Sleep Mode < 1 W Off Mode < 0.5 W Dimensions & Weight With Stand Without Stand Width 46.34 cm (18.24 inch) Width 46.34 cm (18.24 inch) Height 37.35 cm (14.70 inch) Height 30.20 cm (11.89 inch) Depth 17.40 cm (6.85 inch) Depth 4.3 cm (1.69 inch) Weight(excl. packing) 2.4 kg (5.29 lb) Range Tilt : -5" to 15" Power Input 12 V = 2.0 A AC-DC Adapter Type ADS-24S-12 1224G*, manufactured by HONOR Electronic or type MU24-B120200-xx, manufactured by LEADER Electronics or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics Environment al Conditions Operating Conditions Temperature 10 "C to 35 "C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 "C to 60 "C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE ■ Information in this document is subject to change without notice. » Specifications E1940S Display 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Sync Input Horizontal Freq. 30 kHz to 61 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Composite Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz Plug&Play DDC 2AB Power Consumption On Mode : 17 W(Typ.) Sleep Mode < 1 W Off Mode < 0.5 W Dimensions & Weight With Stand Without Stand Width 46.34 cm (18.24 inch) Width 46.34 cm (18.24 inch) Height 37.35 cm (14.70 inch) Height 30.20 cm (11.89 inch) Depth 17.40 cm (6.85 inch) Depth 4.3 cm (1.69 inch) Weight(excl. packing) 2.4 kg (5.29 lb) Range Tilt : -5" to 15" Power Input 12 V = 2.0 A AC-DC Adapter Type ADS-24S-12 1224G*, manufactured by HONOR Electronic or type MU2...
Other models in this manual:Displays - E1940S (5.65 mb)
Displays - E1940S-PN (5.65 mb)
Displays - E1940T (5.65 mb)
Displays - E2040S (5.65 mb)