Votes - , Average rating:
(
)
)
Manafacture: LG
File size: 1.78 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
CINEMA 3D MONITOR MODEL D2242P D2542P 2 TABLE OF CONTENTS ENGLISH ENG CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 6 Setting up the Monitor set 6 - Attaching the Stand Base 6 - Detaching the Stand Base and Body 7 - Mounting on a table 8 - Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 12 Accessing The Main Menus 13 Customizing Settings 13 - Menu Settings 14 - 3D Settings(Only 3D mode) 14 - Volume Settings (Only supported in HDMI) 15 - SUPER ENERGY SAVING Settings 16 TROUBLESHOOTING 18 TROUBLESHOOTING WHEN USING 3D MODE 19 SPECIFICATIONS 21 Preset Modes (Resolution) 21 HDMI 3D TIMING 21 Indicator 22 PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES 23 PROPER POSTURE 23 Proper posture for using the Monitor set. 23 Precautions to take when viewing 3D images 3 ASSEMBLING AND PREPARING ENGLISH ENG ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord CD(Owner's Manual) / Card TriDef 3D software Program CD / Quick Installation Guide D-SUB Cable (This signal cable may be attached to this product before shipping out.) DVI-D Cable (This cable is not included in all countries.) Stand Body Stand Base 3D Glasses (Normal type) 3D Glasses (Clip-on type) CAUTION yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. NOTE yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. yyUser should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. ASSEMBLING AND PREPARING 4 ENG ENGLISH Parts and buttons HDMID-SUBAC-IN/ ........DVI-D Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10) Button Description MENU Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. SUPER ENERGY SAVING Button Use this button to enter SUPER ENERGY SAVING menu.For more information.(See p.15) 3D 3D display settings.(See p.14) AUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 (D2242P/D2542P) VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14) INPUT You can choose the input signal. yyWhen two input signals are at least are connected, you can select the input signal (D-SUB/DVI/HDMI) you want. yyWhen only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off. Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue. Detaching the Stand Base and Body 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Pull out the Stand Base and Stand Body from the Monitor set. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”. Hinge Body 3 Turn the screw to the left with a Coin, and then pull out the Stand Base from the Stand Body. Stand Body 3 Attach the Stand Base and then tighten the screw to the right with a Coin. CAUTION yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Stand Base Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. WARNING When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. 2 Connect th...